GanemiX 🧮 Calculator

Waterborne Basecoat Solid Mix Ratio & HardenerCromax Basecoat

Waterborne Basecoat Solid is a Cromax (Axalta) automotive refinish basecoat. With hardener WB2040/45, the mix ratio is Base 100 : Hardener 10 (by weight).

Mix ratio (by weight)

100 : 10
Base
Waterborne Basecoat Solid
Hardener
WB2040/45
Thinner
None
Pot life
Same day

Weight chart

BaseHardenerTotal
50 g5 g55 g
100 g10 g110 g
200 g20 g220 g
300 g30 g330 g
500 g50 g550 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 110 g

🧮 Calculate any amount with this mix

Tips for using Waterborne Basecoat Solid

How to read the ratio and weigh it

The mix for Waterborne Basecoat Solid is "Base 100 : Hardener 10 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 30 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for Waterborne Basecoat Solid is WB2040/45. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about Same day. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for basecoats

The basecoat sets the color. Build it in thin coats while checking coverage, and prepare the blend edge before the clearcoat. A wrong viscosity is a common cause of mottling.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 5 g. Misreading the hardener by 1 g shifts the hardener amount by about 20%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

FAQ

What is the mix ratio of Waterborne Basecoat Solid?

with WB2040/45: Base 100 : Hardener 10 (by weight).

Which hardener and thinner does Waterborne Basecoat Solid use?

hardener WB2040/45, no thinner.

How much hardener and thinner do I need for 100 g of Waterborne Basecoat Solid?

WB2040/45: 10 g hardener (110 g in total).

More Cromax Basecoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site