GanemiX 🧮 Calculator

Waterborne Basecoat Standard Mix Ratio & HardenerCromax Basecoat

Waterborne Basecoat Standard is a Cromax (Axalta) automotive refinish basecoat. With hardener WB2040/45, the mix ratio is Base 100 : Hardener 20 (by weight).

Mix ratio (by weight)

100 : 20
Base
Waterborne Basecoat Standard
Hardener
WB2040/45
Thinner
None
Pot life
Same day

Weight chart

BaseHardenerTotal
50 g10 g60 g
100 g20 g120 g
200 g40 g240 g
300 g60 g360 g
500 g100 g600 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 120 g

🧮 Calculate any amount with this mix

Tips for using Waterborne Basecoat Standard

How to read the ratio and weigh it

The mix for Waterborne Basecoat Standard is "Base 100 : Hardener 20 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 60 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for Waterborne Basecoat Standard is WB2040/45. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about Same day. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for basecoats

The basecoat sets the color. Build it in thin coats while checking coverage, and prepare the blend edge before the clearcoat. A wrong viscosity is a common cause of mottling.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 10 g. Misreading the hardener by 1 g shifts the hardener amount by about 10%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

FAQ

What is the mix ratio of Waterborne Basecoat Standard?

with WB2040/45: Base 100 : Hardener 20 (by weight).

Which hardener and thinner does Waterborne Basecoat Standard use?

hardener WB2040/45, no thinner.

How much hardener and thinner do I need for 100 g of Waterborne Basecoat Standard?

WB2040/45: 20 g hardener (120 g in total).

More Cromax Basecoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site