GanemiX 🧮 Calculator

TEKNOPUR 400-800 Mix Ratio & HardenerTeknos Clearcoat

TEKNOPUR 400-800 is a Teknos (Teknos) automotive refinish clearcoat. With hardener Teknopur Hardener, the mix ratio is Base 100 : Hardener 100 (by weight).

Mix ratio (by weight)

100 : 100
Base
TEKNOPUR 400-800
Hardener
Teknopur Hardener
Thinner
None
Pot life
See the TDS

Weight chart

BaseHardenerTotal
50 g50 g100 g
100 g100 g200 g
200 g200 g400 g
300 g300 g600 g
500 g500 g1000 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 200 g

🧮 Calculate any amount with this mix

Tips for using TEKNOPUR 400-800

How to read the ratio and weigh it

The mix for TEKNOPUR 400-800 is "Base 100 : Hardener 100 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 300 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for TEKNOPUR 400-800 is Teknopur Hardener. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

Check the technical data sheet (TDS) for the pot life. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 50 g. Misreading the hardener by 1 g shifts the hardener amount by about 2%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of TEKNOPUR 400-800?

with Teknopur Hardener: Base 100 : Hardener 100 (by weight).

Which hardener and thinner does TEKNOPUR 400-800 use?

hardener Teknopur Hardener, no thinner.

How much hardener and thinner do I need for 100 g of TEKNOPUR 400-800?

Teknopur Hardener: 100 g hardener (200 g in total).

More Teknos Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Teknos official site