GanemiX 🧮 Calculator

923-255 HS Multi-Clear Mix Ratio & HardenerBASF Clearcoat

923-255 HS Multi-Clear is a BASF (BASF) automotive refinish clearcoat. With hardener Glasurit 929-93 Normal, the mix ratio is Base 100 : Hardener 50 : Thinner 10 (by weight).

Mix ratio (by weight)

100 : 50 : 10
Base
923-255 HS Multi-Clear
Hardener
Glasurit 929-93 Normal
Thinner
Glasurit 352-45 Slow Exempt
Pot life
See the TDS

Weight chart

BaseHardenerThinnerTotal
50 g25 g5 g80 g
100 g50 g10 g160 g
200 g100 g20 g320 g
300 g150 g30 g480 g
500 g250 g50 g800 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 150 g → add thinner to reach 160 g

🧮 Calculate any amount with this mix

Tips for using 923-255 HS Multi-Clear

How to read the ratio and weigh it

The mix for 923-255 HS Multi-Clear is "Base 100 : Hardener 50 : Thinner 10 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 150 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for 923-255 HS Multi-Clear is Glasurit 929-93 Normal. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

Check the technical data sheet (TDS) for the pot life. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 25 g. Misreading the hardener by 1 g shifts the hardener amount by about 4%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of 923-255 HS Multi-Clear?

with Glasurit 929-93 Normal: Base 100 : Hardener 50 : Thinner 10 (by weight).

Which hardener and thinner does 923-255 HS Multi-Clear use?

hardener Glasurit 929-93 Normal, thinner Glasurit 352-45 Slow Exempt.

How much hardener and thinner do I need for 100 g of 923-255 HS Multi-Clear?

Glasurit 929-93 Normal: 50 g hardener, 10 g thinner (160 g in total).

More BASF Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: BASF Coatings official site