GanemiX 🧮 Calculator

Standocryl 2K Crystal Clear K9030 Mix Ratio & HardenerStandox Clearcoat

Standocryl 2K Crystal Clear K9030 is a Standox (PPG group) automotive refinish clearcoat. You can choose from 2 hardeners. With hardener Standox MS Hardeners (various), the mix ratio is Base 100 : Hardener 50 : Thinner 7.5 (by weight).

With hardener Standox MS Hardeners (various)

100 : 50 : 7.5
Base
Standocryl 2K Crystal Clear K9030
Hardener
Standox MS Hardeners (various)
Thinner
Standox 2K Thinners (various)
Pot life
See the TDS

Weight chart

BaseHardenerThinnerTotal
50 g25 g3.8 g78.8 g
100 g50 g7.5 g157.5 g
200 g100 g15 g315 g
300 g150 g22.5 g472.5 g
500 g250 g37.5 g787.5 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 150 g → add thinner to reach 157.5 g

🧮 Calculate any amount with this mix

With hardener Standox HS Hardeners (various)

100 : 33.3 : 6.7
Base
Standocryl 2K Crystal Clear K9030
Hardener
Standox HS Hardeners (various)
Thinner
Standox 2K Thinners (various)
Pot life
18-22°C 4-5h

Weight chart

BaseHardenerThinnerTotal
50 g16.7 g3.4 g70 g
100 g33.3 g6.7 g140 g
200 g66.6 g13.4 g280 g
300 g99.9 g20.1 g420 g
500 g166.5 g33.5 g700 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 133.3 g → add thinner to reach 140 g

🧮 Calculate any amount with this mix

Tips for using Standocryl 2K Crystal Clear K9030

How to read the ratio and weigh it

The mix for Standocryl 2K Crystal Clear K9030 is "Base 100 : Hardener 50 : Thinner 7.5 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 150 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

Standocryl 2K Crystal Clear K9030 works with 2 hardeners (Standox MS Hardeners (various), Standox HS Hardeners (various)). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.

Pot life and how much to mix

The pot life after mixing is about 18-22°C 4-5h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 25 g. Misreading the hardener by 1 g shifts the hardener amount by about 4%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of Standocryl 2K Crystal Clear K9030?

with Standox MS Hardeners (various): Base 100 : Hardener 50 : Thinner 7.5 (by weight). with Standox HS Hardeners (various): Base 100 : Hardener 33.3 : Thinner 6.7 (by weight).

Which hardener and thinner does Standocryl 2K Crystal Clear K9030 use?

hardener Standox MS Hardeners (various), thinner Standox 2K Thinners (various). hardener Standox HS Hardeners (various), thinner Standox 2K Thinners (various).

How much hardener and thinner do I need for 100 g of Standocryl 2K Crystal Clear K9030?

Standox MS Hardeners (various): 50 g hardener, 7.5 g thinner (157.5 g in total). Standox HS Hardeners (various): 33.3 g hardener, 6.7 g thinner (140 g in total).

More Standox Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Standox official site