GanemiX 🧮 Calculator

801-76 Elite Epoxy Primer Mix Ratio & HardenerBASF Surfacer

801-76 Elite Epoxy Primer is a BASF (BASF) automotive refinish surfacer. With hardener Glasurit 965-63, the mix ratio is Base 100 : Hardener 21 : Thinner 20 (by weight).

Mix ratio (by weight)

100 : 21 : 20
Base
801-76 Elite Epoxy Primer
Hardener
Glasurit 965-63
Thinner
Glasurit 352-50 / 352-91 / 352-216
Pot life
20°C 6h

Weight chart

BaseHardenerThinnerTotal
50 g10.5 g10 g70.5 g
100 g21 g20 g141 g
200 g42 g40 g282 g
300 g63 g60 g423 g
500 g105 g100 g705 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 121 g → add thinner to reach 141 g

🧮 Calculate any amount with this mix

Tips for using 801-76 Elite Epoxy Primer

How to read the ratio and weigh it

The mix for 801-76 Elite Epoxy Primer is "Base 100 : Hardener 21 : Thinner 20 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 63 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for 801-76 Elite Epoxy Primer is Glasurit 965-63. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 20°C 6h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for surfacers

The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 10.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 9.5%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Surfacers from other brands

FAQ

What is the mix ratio of 801-76 Elite Epoxy Primer?

with Glasurit 965-63: Base 100 : Hardener 21 : Thinner 20 (by weight).

Which hardener and thinner does 801-76 Elite Epoxy Primer use?

hardener Glasurit 965-63, thinner Glasurit 352-50 / 352-91 / 352-216.

How much hardener and thinner do I need for 100 g of 801-76 Elite Epoxy Primer?

Glasurit 965-63: 21 g hardener, 20 g thinner (141 g in total).

More BASF Surfacers

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: BASF Coatings official site