285-15 Black DTM Primer Filler Mix Ratio & HardenerBASF Surfacer
285-15 Black DTM Primer Filler is a BASF (BASF) automotive refinish surfacer. With hardener Glasurit 929-385, the mix ratio is Base 100 : Hardener 25 : Additive 12 (by weight).
Mix ratio (by weight)
100 : 25 : 12- Base
- 285-15 Black DTM Primer Filler
- Hardener
- Glasurit 929-385
- Additive
- 522-20 Rapid Additive
- Pot life
- 20°C 1h
Weight chart
| Base | Hardener | Additive | Total |
|---|---|---|---|
| 50 g | 12.5 g | 6 g | 68.5 g |
| 100 g | 25 g | 12 g | 137 g |
| 200 g | 50 g | 24 g | 274 g |
| 300 g | 75 g | 36 g | 411 g |
| 500 g | 125 g | 60 g | 685 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 125 g → add additive to reach 137 g
🧮 Calculate any amount with this mixTips for using 285-15 Black DTM Primer Filler
How to read the ratio and weigh it
The mix for 285-15 Black DTM Primer Filler is "Base 100 : Hardener 25 : Additive 12 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 75 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).
Choosing a hardener
The hardener for 285-15 Black DTM Primer Filler is Glasurit 929-385. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.
Pot life and how much to mix
The pot life after mixing is about 20°C 1h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.
Tips for surfacers
The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.
Avoiding weighing mistakes
The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 12.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 8%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.
Surfacers from other brands
FAQ
What is the mix ratio of 285-15 Black DTM Primer Filler?
with Glasurit 929-385: Base 100 : Hardener 25 : Additive 12 (by weight).
Which hardener and thinner does 285-15 Black DTM Primer Filler use?
hardener Glasurit 929-385, additive 522-20 Rapid Additive.
How much hardener and thinner do I need for 100 g of 285-15 Black DTM Primer Filler?
Glasurit 929-385: 25 g hardener, 12 g additive (137 g in total).
More BASF Surfacers
Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: BASF Coatings official site