GanemiX 🧮 Calculator

Hi-Rock ECO HB Primer Surfacer (5:1) Mix Ratio & HardenerRock Paint Surfacer

Hi-Rock ECO HB Primer Surfacer (5:1) is a Rock Paint (Rock Paint) automotive refinish surfacer. You can choose from 2 hardeners. With hardener Hi-Rock ECO Hardeners (various), the mix ratio is Base 100 : Hardener 20 : Thinner 30 (by weight).

With hardener Hi-Rock ECO Hardeners (various)

100 : 20 : 30
Base
Hi-Rock ECO HB Primer Surfacer (5:1)
Hardener
Hi-Rock ECO Hardeners (various)
Thinner
Eco Multi Thinners (various)
Pot life
20°C 4h

Weight chart

BaseHardenerThinnerTotal
50 g10 g15 g75 g
100 g20 g30 g150 g
200 g40 g60 g300 g
300 g60 g90 g450 g
500 g100 g150 g750 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 120 g → add thinner to reach 150 g

🧮 Calculate any amount with this mix

With hardener Eco Multi Hardener Flex

100 : 33.3 : 40
Base
Hi-Rock ECO HB Primer Surfacer (5:1)
Hardener
Eco Multi Hardener Flex
Thinner
Eco Multi Thinners (various)
Pot life
20°C 2h

Weight chart

BaseHardenerThinnerTotal
50 g16.7 g20 g86.7 g
100 g33.3 g40 g173.3 g
200 g66.6 g80 g346.6 g
300 g99.9 g120 g519.9 g
500 g166.5 g200 g866.5 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 133.3 g → add thinner to reach 173.3 g

🧮 Calculate any amount with this mix

Tips for using Hi-Rock ECO HB Primer Surfacer (5:1)

How to read the ratio and weigh it

The mix for Hi-Rock ECO HB Primer Surfacer (5:1) is "Base 100 : Hardener 20 : Thinner 30 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 60 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

Hi-Rock ECO HB Primer Surfacer (5:1) works with 2 hardeners (Hi-Rock ECO Hardeners (various), Eco Multi Hardener Flex). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.

Pot life and how much to mix

The pot life after mixing is about 20°C 4h, 20°C 2h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for surfacers

The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 10 g. Misreading the hardener by 1 g shifts the hardener amount by about 10%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Surfacers from other brands

FAQ

What is the mix ratio of Hi-Rock ECO HB Primer Surfacer (5:1)?

with Hi-Rock ECO Hardeners (various): Base 100 : Hardener 20 : Thinner 30 (by weight). with Eco Multi Hardener Flex: Base 100 : Hardener 33.3 : Thinner 40 (by weight).

Which hardener and thinner does Hi-Rock ECO HB Primer Surfacer (5:1) use?

hardener Hi-Rock ECO Hardeners (various), thinner Eco Multi Thinners (various). hardener Eco Multi Hardener Flex, thinner Eco Multi Thinners (various).

How much hardener and thinner do I need for 100 g of Hi-Rock ECO HB Primer Surfacer (5:1)?

Hi-Rock ECO Hardeners (various): 20 g hardener, 30 g thinner (150 g in total). Eco Multi Hardener Flex: 33.3 g hardener, 40 g thinner (173.3 g in total).

More Rock Paint Surfacers

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Rock Paint official site