Standox 2K Nonstop Primer Filler Mix Ratio & HardenerStandox Surfacer
Standox 2K Nonstop Primer Filler is a Standox (PPG group) automotive refinish surfacer. With hardener Standox 2K Hardeners (various), the mix ratio is Base 100 : Hardener 33.3 : Thinner 18 (by weight).
Mix ratio (by weight)
100 : 33.3 : 18- Base
- Standox 2K Nonstop Primer Filler
- Hardener
- Standox 2K Hardeners (various)
- Thinner
- Standox 2K Thinners (various)
- Pot life
- 20°C 30min
Weight chart
| Base | Hardener | Thinner | Total |
|---|---|---|---|
| 50 g | 16.7 g | 9 g | 75.7 g |
| 100 g | 33.3 g | 18 g | 151.3 g |
| 200 g | 66.6 g | 36 g | 302.6 g |
| 300 g | 99.9 g | 54 g | 453.9 g |
| 500 g | 166.5 g | 90 g | 756.5 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 133.3 g → add thinner to reach 151.3 g
🧮 Calculate any amount with this mixTips for using Standox 2K Nonstop Primer Filler
How to read the ratio and weigh it
The mix for Standox 2K Nonstop Primer Filler is "Base 100 : Hardener 33.3 : Thinner 18 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 99.9 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).
Choosing a hardener
The hardener for Standox 2K Nonstop Primer Filler is Standox 2K Hardeners (various). Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.
Pot life and how much to mix
The pot life after mixing is about 20°C 30min. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.
Tips for surfacers
The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.
Avoiding weighing mistakes
The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 16.7 g. Misreading the hardener by 1 g shifts the hardener amount by about 6%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.
Surfacers from other brands
FAQ
What is the mix ratio of Standox 2K Nonstop Primer Filler?
with Standox 2K Hardeners (various): Base 100 : Hardener 33.3 : Thinner 18 (by weight).
Which hardener and thinner does Standox 2K Nonstop Primer Filler use?
hardener Standox 2K Hardeners (various), thinner Standox 2K Thinners (various).
How much hardener and thinner do I need for 100 g of Standox 2K Nonstop Primer Filler?
Standox 2K Hardeners (various): 33.3 g hardener, 18 g thinner (151.3 g in total).
More Standox Surfacers
Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Standox official site