GanemiX 🧮 Calculator

V-Top Clear Mix Ratio & HardenerDai Nippon Toryo Clearcoat

V-Top Clear is a Dai Nippon Toryo (Dai Nippon Toryo) automotive refinish clearcoat. With hardener V-Top Hardener, the mix ratio is Base 100 : Hardener 25 : Thinner 5 (by weight).

Mix ratio (by weight)

100 : 25 : 5
Base
V-Top Clear
Hardener
V-Top Hardener
Thinner
V-Top Thinner
Pot life
20°C 16h

Weight chart

BaseHardenerThinnerTotal
50 g12.5 g2.5 g65 g
100 g25 g5 g130 g
200 g50 g10 g260 g
300 g75 g15 g390 g
500 g125 g25 g650 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 125 g → add thinner to reach 130 g

🧮 Calculate any amount with this mix

Tips for using V-Top Clear

How to read the ratio and weigh it

The mix for V-Top Clear is "Base 100 : Hardener 25 : Thinner 5 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 75 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for V-Top Clear is V-Top Hardener. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 20°C 16h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 12.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 8%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of V-Top Clear?

with V-Top Hardener: Base 100 : Hardener 25 : Thinner 5 (by weight).

Which hardener and thinner does V-Top Clear use?

hardener V-Top Hardener, thinner V-Top Thinner.

How much hardener and thinner do I need for 100 g of V-Top Clear?

V-Top Hardener: 25 g hardener, 5 g thinner (130 g in total).

More Dai Nippon Toryo Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Dai Nippon Toryo official site