GanemiX 🧮 Calculator

Brain Clear SF Mix Ratio & HardenerDai Nippon Toryo Clearcoat

Brain Clear SF is a Dai Nippon Toryo (Dai Nippon Toryo) automotive refinish clearcoat. With hardener Auto Urethane Hardener #20, the mix ratio is Base 100 : Hardener 20 (by weight).

Mix ratio (by weight)

100 : 20
Base
Brain Clear SF
Hardener
Auto Urethane Hardener #20
Thinner
None
Pot life
See the TDS

Weight chart

BaseHardenerTotal
50 g10 g60 g
100 g20 g120 g
200 g40 g240 g
300 g60 g360 g
500 g100 g600 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 120 g

🧮 Calculate any amount with this mix

Tips for using Brain Clear SF

How to read the ratio and weigh it

The mix for Brain Clear SF is "Base 100 : Hardener 20 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 60 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for Brain Clear SF is Auto Urethane Hardener #20. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

Check the technical data sheet (TDS) for the pot life. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 10 g. Misreading the hardener by 1 g shifts the hardener amount by about 10%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of Brain Clear SF?

with Auto Urethane Hardener #20: Base 100 : Hardener 20 (by weight).

Which hardener and thinner does Brain Clear SF use?

hardener Auto Urethane Hardener #20, no thinner.

How much hardener and thinner do I need for 100 g of Brain Clear SF?

Auto Urethane Hardener #20: 20 g hardener (120 g in total).

More Dai Nippon Toryo Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Dai Nippon Toryo official site