GanemiX 🧮 Calculator

Brain Clear JT Mix Ratio & HardenerDai Nippon Toryo Clearcoat

Brain Clear JT is a Dai Nippon Toryo (Dai Nippon Toryo) automotive refinish clearcoat. With hardener Auto HS Hardener Standard, the mix ratio is Base 100 : Hardener 10 (by weight).

Mix ratio (by weight)

100 : 10
Base
Brain Clear JT
Hardener
Auto HS Hardener Standard
Thinner
None
Pot life
See the TDS

Weight chart

BaseHardenerTotal
50 g5 g55 g
100 g10 g110 g
200 g20 g220 g
300 g30 g330 g
500 g50 g550 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 110 g

🧮 Calculate any amount with this mix

Tips for using Brain Clear JT

How to read the ratio and weigh it

The mix for Brain Clear JT is "Base 100 : Hardener 10 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 30 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for Brain Clear JT is Auto HS Hardener Standard. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

Check the technical data sheet (TDS) for the pot life. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 5 g. Misreading the hardener by 1 g shifts the hardener amount by about 20%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of Brain Clear JT?

with Auto HS Hardener Standard: Base 100 : Hardener 10 (by weight).

Which hardener and thinner does Brain Clear JT use?

hardener Auto HS Hardener Standard, no thinner.

How much hardener and thinner do I need for 100 g of Brain Clear JT?

Auto HS Hardener Standard: 10 g hardener (110 g in total).

More Dai Nippon Toryo Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Dai Nippon Toryo official site