GanemiX 🧮 Calculator

Ultra Surfacer Fine Plus Mix Ratio & HardenerIsamu Paint Surfacer

Ultra Surfacer Fine Plus is an Isamu Paint (Isamu Paint) automotive refinish surfacer. With hardener Dedicated Hardener, the mix ratio is Base 100 : Hardener 20 (by weight).

Mix ratio (by weight)

100 : 20
Base
Ultra Surfacer Fine Plus
Hardener
Dedicated Hardener
Thinner
None
Pot life
20°C 40min

Weight chart

BaseHardenerTotal
50 g10 g60 g
100 g20 g120 g
200 g40 g240 g
300 g60 g360 g
500 g100 g600 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 120 g

🧮 Calculate any amount with this mix

Tips for using Ultra Surfacer Fine Plus

How to read the ratio and weigh it

The mix for Ultra Surfacer Fine Plus is "Base 100 : Hardener 20 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 60 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for Ultra Surfacer Fine Plus is Dedicated Hardener. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 20°C 40min. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for surfacers

The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 10 g. Misreading the hardener by 1 g shifts the hardener amount by about 10%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Surfacers from other brands

FAQ

What is the mix ratio of Ultra Surfacer Fine Plus?

with Dedicated Hardener: Base 100 : Hardener 20 (by weight).

Which hardener and thinner does Ultra Surfacer Fine Plus use?

hardener Dedicated Hardener, no thinner.

How much hardener and thinner do I need for 100 g of Ultra Surfacer Fine Plus?

Dedicated Hardener: 20 g hardener (120 g in total).

More Isamu Paint Surfacers

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Isamu Paint official site