GanemiX 🧮 Calculator

PS107x Mix Ratio & HardenerCromax Surfacer

PS107x (PS1071/PS1074/PS1077) is a Cromax (Axalta) automotive refinish surfacer. It comes in 3 versions (Sanding, Maxi and Non-Sanding), and each one has its own hardener choices. For example, in the Sanding version with hardener 256S/AK260/AK261, the mix ratio is Base 100 : Hardener 14 : Thinner 21.5 (by weight).

Sanding version (hardener 256S/AK260/AK261)

100 : 14 : 21.5
Base
PS107x (PS1071/PS1074/PS1077)
Hardener
256S/AK260/AK261
Thinner (18-25)
JAB380/385/JXB387
Pot life
20°C 1h

Weight chart

BaseHardenerThinner (18-25)Total
50 g7 g10.8 g67.8 g
100 g14 g21.5 g135.5 g
200 g28 g43 g271 g
300 g42 g64.5 g406.5 g
500 g70 g107.5 g677.5 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 114 g → add thinner (18-25) to reach 135.5 g

* The TDS gives a range for the thinner (18-25), so this chart uses the midpoint.

🧮 Calculate any amount with this mix

Sanding version (hardener XK203/XK205/XK206)

100 : 10 : 24.5
Base
PS107x (PS1071/PS1074/PS1077)
Hardener
XK203/XK205/XK206
Thinner (22-27)
JAB380/385/JXB387
Pot life
20°C 1h

Weight chart

BaseHardenerThinner (22-27)Total
50 g5 g12.3 g67.3 g
100 g10 g24.5 g134.5 g
200 g20 g49 g269 g
300 g30 g73.5 g403.5 g
500 g50 g122.5 g672.5 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 110 g → add thinner (22-27) to reach 134.5 g

* The TDS gives a range for the thinner (22-27), so this chart uses the midpoint.

🧮 Calculate any amount with this mix

Maxi version (hardener 256S/AK260/AK261)

100 : 14 : 13
Base
PS107x (PS1071/PS1074/PS1077)
Hardener
256S/AK260/AK261
Thinner
JAB380/385/JXB387
Pot life
20°C 45min

Weight chart

BaseHardenerThinnerTotal
50 g7 g6.5 g63.5 g
100 g14 g13 g127 g
200 g28 g26 g254 g
300 g42 g39 g381 g
500 g70 g65 g635 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 114 g → add thinner to reach 127 g

🧮 Calculate any amount with this mix

Maxi version (hardener XK203/XK205/XK206)

100 : 10 : 17
Base
PS107x (PS1071/PS1074/PS1077)
Hardener
XK203/XK205/XK206
Thinner
JAB380/385/JXB387
Pot life
20°C 45min

Weight chart

BaseHardenerThinnerTotal
50 g5 g8.5 g63.5 g
100 g10 g17 g127 g
200 g20 g34 g254 g
300 g30 g51 g381 g
500 g50 g85 g635 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 110 g → add thinner to reach 127 g

🧮 Calculate any amount with this mix

Non-Sanding version (hardener 256S/AK260/AK261)

100 : 24 : 44 : 8
Base
PS107x (PS1071/PS1074/PS1077)
Hardener
256S/AK260/AK261
Converter
AZ9032
Thinner
JAB380/385/JXB387
Pot life
20°C 1h

Weight chart

BaseHardenerConverterThinnerTotal
50 g12 g22 g4 g88 g
100 g24 g44 g8 g176 g
200 g48 g88 g16 g352 g
300 g72 g132 g24 g528 g
500 g120 g220 g40 g880 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 124 g → add converter to reach 168 g → add thinner to reach 176 g

🧮 Calculate any amount with this mix

Non-Sanding version (hardener XK203/XK205/XK206)

100 : 17 : 44 : 15
Base
PS107x (PS1071/PS1074/PS1077)
Hardener
XK203/XK205/XK206
Converter
AZ9032
Thinner
JAB380/385/JXB387
Pot life
20°C 1h

Weight chart

BaseHardenerConverterThinnerTotal
50 g8.5 g22 g7.5 g88 g
100 g17 g44 g15 g176 g
200 g34 g88 g30 g352 g
300 g51 g132 g45 g528 g
500 g85 g220 g75 g880 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 117 g → add converter to reach 161 g → add thinner to reach 176 g

🧮 Calculate any amount with this mix

Tips for using PS107x

How to read the ratio and weigh it

The mix for PS107x (PS1071/PS1074/PS1077) is "Base 100 : Hardener 14 : Thinner 21.5 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 42 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

PS107x works with 2 hardeners (256S/AK260/AK261, XK203/XK205/XK206). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.

Pot life and how much to mix

The pot life after mixing is about 20°C 1h, 20°C 45min. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for surfacers

The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 7 g. Misreading the hardener by 1 g shifts the hardener amount by about 14.3%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Surfacers from other brands

FAQ

What is the mix ratio of PS107x?

Sanding version, with 256S/AK260/AK261: Base 100 : Hardener 14 : Thinner 21.5 (by weight). Sanding version, with XK203/XK205/XK206: Base 100 : Hardener 10 : Thinner 24.5 (by weight). Maxi version, with 256S/AK260/AK261: Base 100 : Hardener 14 : Thinner 13 (by weight). Maxi version, with XK203/XK205/XK206: Base 100 : Hardener 10 : Thinner 17 (by weight). Non-Sanding version, with 256S/AK260/AK261: Base 100 : Hardener 24 : Converter 44 : Thinner 8 (by weight). Non-Sanding version, with XK203/XK205/XK206: Base 100 : Hardener 17 : Converter 44 : Thinner 15 (by weight).

Which hardener and thinner does PS107x use?

Sanding 256S/AK: hardener 256S/AK260/AK261, thinner (18-25) JAB380/385/JXB387. Sanding XK: hardener XK203/XK205/XK206, thinner (22-27) JAB380/385/JXB387. Maxi 256S/AK: hardener 256S/AK260/AK261, thinner JAB380/385/JXB387. Maxi XK: hardener XK203/XK205/XK206, thinner JAB380/385/JXB387. Non-Sanding 256S/AK: hardener 256S/AK260/AK261, converter AZ9032, thinner JAB380/385/JXB387. Non-Sanding XK: hardener XK203/XK205/XK206, converter AZ9032, thinner JAB380/385/JXB387.

How much hardener and thinner do I need for 100 g of PS107x?

Sanding 256S/AK: 14 g hardener, 21.5 g thinner (18-25) (135.5 g in total). Sanding XK: 10 g hardener, 24.5 g thinner (22-27) (134.5 g in total). Maxi 256S/AK: 14 g hardener, 13 g thinner (127 g in total). Maxi XK: 10 g hardener, 17 g thinner (127 g in total). Non-Sanding 256S/AK: 24 g hardener, 44 g converter, 8 g thinner (176 g in total). Non-Sanding XK: 17 g hardener, 44 g converter, 15 g thinner (176 g in total).

More Cromax Surfacers

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site