Retan WB Eco EV EQ Primer Surfacer Mix Ratio & HardenerKansai Paint Surfacer
Retan WB Eco EV EQ Primer Surfacer is a Kansai Paint (Kansai Paint) automotive refinish surfacer. With hardener EV EQ Surfacer Hardener, the mix ratio is Base 100 : Hardener 15 : Water 38 (by weight).
Mix ratio (by weight)
100 : 15 : 38- Base
- Retan WB Eco EV EQ Primer Surfacer
- Hardener
- EV EQ Surfacer Hardener
- Water
- EV 881 ST Dilution Water
- Pot life
- 20°C 60min
Weight chart
| Base | Hardener | Water | Total |
|---|---|---|---|
| 50 g | 7.5 g | 19 g | 76.5 g |
| 100 g | 15 g | 38 g | 153 g |
| 200 g | 30 g | 76 g | 306 g |
| 300 g | 45 g | 114 g | 459 g |
| 500 g | 75 g | 190 g | 765 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 115 g → add water to reach 153 g
🧮 Calculate any amount with this mixTips for using Retan WB Eco EV EQ Primer Surfacer
How to read the ratio and weigh it
The mix for Retan WB Eco EV EQ Primer Surfacer is "Base 100 : Hardener 15 : Water 38 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 45 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).
Choosing a hardener
The hardener for Retan WB Eco EV EQ Primer Surfacer is EV EQ Surfacer Hardener. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.
Pot life and how much to mix
The pot life after mixing is about 20°C 60min. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.
Tips for surfacers
The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.
Avoiding weighing mistakes
The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 7.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 13.3%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.
Surfacers from other brands
FAQ
What is the mix ratio of Retan WB Eco EV EQ Primer Surfacer?
with EV EQ Surfacer Hardener: Base 100 : Hardener 15 : Water 38 (by weight).
Which hardener and thinner does Retan WB Eco EV EQ Primer Surfacer use?
hardener EV EQ Surfacer Hardener, water EV 881 ST Dilution Water.
How much hardener and thinner do I need for 100 g of Retan WB Eco EV EQ Primer Surfacer?
EV EQ Surfacer Hardener: 15 g hardener, 38 g water (153 g in total).
More Kansai Paint Surfacers
Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Kansai Paint official site