GanemiX 🧮 Calculator

Autocoat BT LV 350 Primer EP Mix Ratio & HardenerAkzoNobel Surfacer

Autocoat BT LV 350 Primer EP is an AkzoNobel (AkzoNobel) automotive refinish surfacer. You can choose from 2 hardeners. With hardener LV 350 Primer EP Hardener, the mix ratio is Base 100 : Hardener 19 : Thinner 9 (by weight).

With hardener LV 350 Primer EP Hardener

100 : 19 : 9
Base
Autocoat BT LV 350 Primer EP
Hardener
LV 350 Primer EP Hardener
Thinner
LV 350 Primer EP Reducer
Pot life
20°C 8h

Weight chart

BaseHardenerThinnerTotal
50 g9.5 g4.5 g64 g
100 g19 g9 g128 g
200 g38 g18 g256 g
300 g57 g27 g384 g
500 g95 g45 g640 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 119 g → add thinner to reach 128 g

🧮 Calculate any amount with this mix

With hardener LV 350 Primer EP Hardener Fast

100 : 31 : 21
Base
Autocoat BT LV 350 Primer EP
Hardener
LV 350 Primer EP Hardener Fast
Thinner
LV 350 Primer EP Reducer
Pot life
20°C 4h

Weight chart

BaseHardenerThinnerTotal
50 g15.5 g10.5 g76 g
100 g31 g21 g152 g
200 g62 g42 g304 g
300 g93 g63 g456 g
500 g155 g105 g760 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 131 g → add thinner to reach 152 g

🧮 Calculate any amount with this mix

Tips for using Autocoat BT LV 350 Primer EP

How to read the ratio and weigh it

The mix for Autocoat BT LV 350 Primer EP is "Base 100 : Hardener 19 : Thinner 9 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 57 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

Autocoat BT LV 350 Primer EP works with 2 hardeners (LV 350 Primer EP Hardener, LV 350 Primer EP Hardener Fast). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.

Pot life and how much to mix

The pot life after mixing is about 20°C 8h, 20°C 4h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for surfacers

The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 9.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 10.5%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Surfacers from other brands

FAQ

What is the mix ratio of Autocoat BT LV 350 Primer EP?

with LV 350 Primer EP Hardener: Base 100 : Hardener 19 : Thinner 9 (by weight). with LV 350 Primer EP Hardener Fast: Base 100 : Hardener 31 : Thinner 21 (by weight).

Which hardener and thinner does Autocoat BT LV 350 Primer EP use?

hardener LV 350 Primer EP Hardener, thinner LV 350 Primer EP Reducer. hardener LV 350 Primer EP Hardener Fast, thinner LV 350 Primer EP Reducer.

How much hardener and thinner do I need for 100 g of Autocoat BT LV 350 Primer EP?

LV 350 Primer EP Hardener: 19 g hardener, 9 g thinner (128 g in total). LV 350 Primer EP Hardener Fast: 31 g hardener, 21 g thinner (152 g in total).

More AkzoNobel Surfacers

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: AkzoNobel official site