GanemiX 🧮 Calculator

Standox 2K HS System Filler Mix Ratio & HardenerStandox Surfacer

Standox 2K HS System Filler is a Standox (PPG group) automotive refinish surfacer. With hardener Standox 2K Hardeners (various), the mix ratio is Base 100 : Hardener 25 : Thinner 2.5 (by weight).

Mix ratio (by weight)

100 : 25 : 2.5
Base
Standox 2K HS System Filler
Hardener
Standox 2K Hardeners (various)
Thinner
Standox 2K Thinners (various)
Pot life
20°C 60-90min

Weight chart

BaseHardenerThinnerTotal
50 g12.5 g1.3 g63.8 g
100 g25 g2.5 g127.5 g
200 g50 g5 g255 g
300 g75 g7.5 g382.5 g
500 g125 g12.5 g637.5 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 125 g → add thinner to reach 127.5 g

🧮 Calculate any amount with this mix

Tips for using Standox 2K HS System Filler

How to read the ratio and weigh it

The mix for Standox 2K HS System Filler is "Base 100 : Hardener 25 : Thinner 2.5 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 75 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for Standox 2K HS System Filler is Standox 2K Hardeners (various). Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 20°C 60-90min. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for surfacers

The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 12.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 8%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Surfacers from other brands

FAQ

What is the mix ratio of Standox 2K HS System Filler?

with Standox 2K Hardeners (various): Base 100 : Hardener 25 : Thinner 2.5 (by weight).

Which hardener and thinner does Standox 2K HS System Filler use?

hardener Standox 2K Hardeners (various), thinner Standox 2K Thinners (various).

How much hardener and thinner do I need for 100 g of Standox 2K HS System Filler?

Standox 2K Hardeners (various): 25 g hardener, 2.5 g thinner (127.5 g in total).

More Standox Surfacers

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Standox official site