GanemiX 🧮 Calculator

Eco HS Clearcoat Plus Mix Ratio & HardenerKansai Paint Clearcoat

Eco HS Clearcoat Plus is a Kansai Paint (Kansai Paint) automotive refinish clearcoat. With hardener Eco HS Clear Hardeners (various), the mix ratio is Base 100 : Hardener 50 (by weight).

Mix ratio (by weight)

100 : 50
Base
Eco HS Clearcoat Plus
Hardener
Eco HS Clear Hardeners (various)
Thinner
None
Pot life
See the TDS

Weight chart

BaseHardenerTotal
50 g25 g75 g
100 g50 g150 g
200 g100 g300 g
300 g150 g450 g
500 g250 g750 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 150 g

🧮 Calculate any amount with this mix

Tips for using Eco HS Clearcoat Plus

How to read the ratio and weigh it

The mix for Eco HS Clearcoat Plus is "Base 100 : Hardener 50 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 150 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for Eco HS Clearcoat Plus is Eco HS Clear Hardeners (various). Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

Check the technical data sheet (TDS) for the pot life. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 25 g. Misreading the hardener by 1 g shifts the hardener amount by about 4%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of Eco HS Clearcoat Plus?

with Eco HS Clear Hardeners (various): Base 100 : Hardener 50 (by weight).

Which hardener and thinner does Eco HS Clearcoat Plus use?

hardener Eco HS Clear Hardeners (various), no thinner.

How much hardener and thinner do I need for 100 g of Eco HS Clearcoat Plus?

Eco HS Clear Hardeners (various): 50 g hardener (150 g in total).

More Kansai Paint Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Kansai Paint official site