GanemiX 🧮 Calculator

Standocryl Clear PFC Air Dry Mix Ratio & HardenerStandox Clearcoat

Standocryl Clear PFC Air Dry is a Standox (PPG group) automotive refinish clearcoat. You can choose from 2 hardeners. With hardener Standox PF Hardeners (various), the mix ratio is Base 100 : Hardener 25 : Thinner 5 (by weight).

With hardener Standox PF Hardeners (various)

100 : 25 : 5
Base
Standocryl Clear PFC Air Dry
Hardener
Standox PF Hardeners (various)
Thinner
Standox PF Thinner / Fast-Dry Agent
Pot life
20°C 1h

Weight chart

BaseHardenerThinnerTotal
50 g12.5 g2.5 g65 g
100 g25 g5 g130 g
200 g50 g10 g260 g
300 g75 g15 g390 g
500 g125 g25 g650 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 125 g → add thinner to reach 130 g

🧮 Calculate any amount with this mix

With hardener Standox 2K Hardeners (various)

100 : 33.3 : 6.7
Base
Standocryl Clear PFC Air Dry
Hardener
Standox 2K Hardeners (various)
Thinner
Standox 2K Thinners (various)
Pot life
See the TDS

Weight chart

BaseHardenerThinnerTotal
50 g16.7 g3.4 g70 g
100 g33.3 g6.7 g140 g
200 g66.6 g13.4 g280 g
300 g99.9 g20.1 g420 g
500 g166.5 g33.5 g700 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 133.3 g → add thinner to reach 140 g

🧮 Calculate any amount with this mix

Tips for using Standocryl Clear PFC Air Dry

How to read the ratio and weigh it

The mix for Standocryl Clear PFC Air Dry is "Base 100 : Hardener 25 : Thinner 5 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 75 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

Standocryl Clear PFC Air Dry works with 2 hardeners (Standox PF Hardeners (various), Standox 2K Hardeners (various)). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.

Pot life and how much to mix

The pot life after mixing is about 20°C 1h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 12.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 8%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of Standocryl Clear PFC Air Dry?

with Standox PF Hardeners (various): Base 100 : Hardener 25 : Thinner 5 (by weight). with Standox 2K Hardeners (various): Base 100 : Hardener 33.3 : Thinner 6.7 (by weight).

Which hardener and thinner does Standocryl Clear PFC Air Dry use?

hardener Standox PF Hardeners (various), thinner Standox PF Thinner / Fast-Dry Agent. hardener Standox 2K Hardeners (various), thinner Standox 2K Thinners (various).

How much hardener and thinner do I need for 100 g of Standocryl Clear PFC Air Dry?

Standox PF Hardeners (various): 25 g hardener, 5 g thinner (130 g in total). Standox 2K Hardeners (various): 33.3 g hardener, 6.7 g thinner (140 g in total).

More Standox Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Standox official site