GanemiX 🧮 Calculator

Eco Clearcoat HX Mix Ratio & HardenerKansai Paint Clearcoat

Eco Clearcoat HX is a Kansai Paint (Kansai Paint) automotive refinish clearcoat. With hardener Eco Clear HX Hardeners (various), the mix ratio is Base 100 : Hardener 40 (by weight).

Mix ratio (by weight)

100 : 40
Base
Eco Clearcoat HX
Hardener
Eco Clear HX Hardeners (various)
Thinner
None
Pot life
See the TDS

Weight chart

BaseHardenerTotal
50 g20 g70 g
100 g40 g140 g
200 g80 g280 g
300 g120 g420 g
500 g200 g700 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 140 g

🧮 Calculate any amount with this mix

Tips for using Eco Clearcoat HX

How to read the ratio and weigh it

The mix for Eco Clearcoat HX is "Base 100 : Hardener 40 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 120 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for Eco Clearcoat HX is Eco Clear HX Hardeners (various). Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

Check the technical data sheet (TDS) for the pot life. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 20 g. Misreading the hardener by 1 g shifts the hardener amount by about 5%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of Eco Clearcoat HX?

with Eco Clear HX Hardeners (various): Base 100 : Hardener 40 (by weight).

Which hardener and thinner does Eco Clearcoat HX use?

hardener Eco Clear HX Hardeners (various), no thinner.

How much hardener and thinner do I need for 100 g of Eco Clearcoat HX?

Eco Clear HX Hardeners (various): 40 g hardener (140 g in total).

More Kansai Paint Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Kansai Paint official site