GanemiX 🧮 Calculator

923-365 Glamour Production Clear Mix Ratio & HardenerBASF Clearcoat

923-365 Glamour Production Clear is a BASF (BASF) automotive refinish clearcoat. With hardener Glasurit 929-93 Normal, the mix ratio is Base 100 : Hardener 50 : Thinner 20 (by weight).

Mix ratio (by weight)

100 : 50 : 20
Base
923-365 Glamour Production Clear
Hardener
Glasurit 929-93 Normal
Thinner
Glasurit 352-91 Normal
Pot life
20°C 1h

Weight chart

BaseHardenerThinnerTotal
50 g25 g10 g85 g
100 g50 g20 g170 g
200 g100 g40 g340 g
300 g150 g60 g510 g
500 g250 g100 g850 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 150 g → add thinner to reach 170 g

🧮 Calculate any amount with this mix

Tips for using 923-365 Glamour Production Clear

How to read the ratio and weigh it

The mix for 923-365 Glamour Production Clear is "Base 100 : Hardener 50 : Thinner 20 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 150 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for 923-365 Glamour Production Clear is Glasurit 929-93 Normal. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 20°C 1h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 25 g. Misreading the hardener by 1 g shifts the hardener amount by about 4%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of 923-365 Glamour Production Clear?

with Glasurit 929-93 Normal: Base 100 : Hardener 50 : Thinner 20 (by weight).

Which hardener and thinner does 923-365 Glamour Production Clear use?

hardener Glasurit 929-93 Normal, thinner Glasurit 352-91 Normal.

How much hardener and thinner do I need for 100 g of 923-365 Glamour Production Clear?

Glasurit 929-93 Normal: 50 g hardener, 20 g thinner (170 g in total).

More BASF Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: BASF Coatings official site