GanemiX 🧮 Calculator

D894 Deltron HS Clear Mix Ratio & HardenerPPG Clearcoat

D894 Deltron HS Clear is a PPG (PPG) automotive refinish clearcoat. You can choose from 2 hardeners. With hardener MS Hardener (D803/D841/D861), the mix ratio is Base 100 : Hardener 49 : Thinner 43 (by weight).

With hardener MS Hardener (D803/D841/D861)

100 : 49 : 43
Base
D894 Deltron HS Clear
Hardener
MS Hardener (D803/D841/D861)
Thinner
D808/D807/D812/D869
Pot life
20°C 3.5-4h

Weight chart

BaseHardenerThinnerTotal
50 g24.5 g21.5 g96 g
100 g49 g43 g192 g
200 g98 g86 g384 g
300 g147 g129 g576 g
500 g245 g215 g960 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 149 g → add thinner to reach 192 g

🧮 Calculate any amount with this mix

With hardener HS Hardener (D897/D8208)

100 : 24 : 11
Base
D894 Deltron HS Clear
Hardener
HS Hardener (D897/D8208)
Thinner
D808/D807/D812
Pot life
20°C 1h

Weight chart

BaseHardenerThinnerTotal
50 g12 g5.5 g67.5 g
100 g24 g11 g135 g
200 g48 g22 g270 g
300 g72 g33 g405 g
500 g120 g55 g675 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 124 g → add thinner to reach 135 g

🧮 Calculate any amount with this mix

Tips for using D894 Deltron HS Clear

How to read the ratio and weigh it

The mix for D894 Deltron HS Clear is "Base 100 : Hardener 49 : Thinner 43 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 147 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

D894 Deltron HS Clear works with 2 hardeners (MS Hardener (D803/D841/D861), HS Hardener (D897/D8208)). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.

Pot life and how much to mix

The pot life after mixing is about 20°C 3.5-4h, 20°C 1h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 24.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 4.1%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of D894 Deltron HS Clear?

with MS Hardener (D803/D841/D861): Base 100 : Hardener 49 : Thinner 43 (by weight). with HS Hardener (D897/D8208): Base 100 : Hardener 24 : Thinner 11 (by weight).

Which hardener and thinner does D894 Deltron HS Clear use?

hardener MS Hardener (D803/D841/D861), thinner D808/D807/D812/D869. hardener HS Hardener (D897/D8208), thinner D808/D807/D812.

How much hardener and thinner do I need for 100 g of D894 Deltron HS Clear?

MS Hardener (D803/D841/D861): 49 g hardener, 43 g thinner (192 g in total). HS Hardener (D897/D8208): 24 g hardener, 11 g thinner (135 g in total).

More PPG Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: PPG Refinish official site