GanemiX 🧮 Calculator

D8177 Rapid Performance Clearcoat Mix Ratio & HardenerPPG Clearcoat

D8177 Rapid Performance Clearcoat is a PPG (PPG) automotive refinish clearcoat. With hardener UHS Hardener (D8307/D8308), the mix ratio is Base 100 : Hardener 54 : Thinner 27 (by weight).

Mix ratio (by weight)

100 : 54 : 27
Base
D8177 Rapid Performance Clearcoat
Hardener
UHS Hardener (D8307/D8308)
Thinner
Accelerator Thinner (D8757/D8758)
Pot life
20°C 45-60min

Weight chart

BaseHardenerThinnerTotal
50 g27 g13.5 g90.5 g
100 g54 g27 g181 g
200 g108 g54 g362 g
300 g162 g81 g543 g
500 g270 g135 g905 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 154 g → add thinner to reach 181 g

🧮 Calculate any amount with this mix

Tips for using D8177 Rapid Performance Clearcoat

How to read the ratio and weigh it

The mix for D8177 Rapid Performance Clearcoat is "Base 100 : Hardener 54 : Thinner 27 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 162 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for D8177 Rapid Performance Clearcoat is UHS Hardener (D8307/D8308). Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 20°C 45-60min. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 27 g. Misreading the hardener by 1 g shifts the hardener amount by about 3.7%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of D8177 Rapid Performance Clearcoat?

with UHS Hardener (D8307/D8308): Base 100 : Hardener 54 : Thinner 27 (by weight).

Which hardener and thinner does D8177 Rapid Performance Clearcoat use?

hardener UHS Hardener (D8307/D8308), thinner Accelerator Thinner (D8757/D8758).

How much hardener and thinner do I need for 100 g of D8177 Rapid Performance Clearcoat?

UHS Hardener (D8307/D8308): 54 g hardener, 27 g thinner (181 g in total).

More PPG Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: PPG Refinish official site