GanemiX 🧮 Calculator

D800 Deltron Clear Mix Ratio & HardenerPPG Clearcoat

D800 Deltron Clear is a PPG (PPG) automotive refinish clearcoat. You can choose from 2 hardeners. With hardener MS Hardener (D803/D841/D861), the mix ratio is Base 100 : Hardener 35 : Thinner 29 (by weight).

With hardener MS Hardener (D803/D841/D861)

100 : 35 : 29
Base
D800 Deltron Clear
Hardener
MS Hardener (D803/D841/D861)
Thinner
D870/D871/D872/D873
Pot life
20°C 6h

Weight chart

BaseHardenerThinnerTotal
50 g17.5 g14.5 g82 g
100 g35 g29 g164 g
200 g70 g58 g328 g
300 g105 g87 g492 g
500 g175 g145 g820 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 135 g → add thinner to reach 164 g

🧮 Calculate any amount with this mix

With hardener Standard Hardener (D802)

100 : 52 : 45
Base
D800 Deltron Clear
Hardener
Standard Hardener (D802)
Thinner
D808/D807/D812
Pot life
20°C 6-8h

Weight chart

BaseHardenerThinnerTotal
50 g26 g22.5 g98.5 g
100 g52 g45 g197 g
200 g104 g90 g394 g
300 g156 g135 g591 g
500 g260 g225 g985 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 152 g → add thinner to reach 197 g

🧮 Calculate any amount with this mix

Tips for using D800 Deltron Clear

How to read the ratio and weigh it

The mix for D800 Deltron Clear is "Base 100 : Hardener 35 : Thinner 29 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 105 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

D800 Deltron Clear works with 2 hardeners (MS Hardener (D803/D841/D861), Standard Hardener (D802)). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.

Pot life and how much to mix

The pot life after mixing is about 20°C 6h, 20°C 6-8h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 17.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 5.7%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of D800 Deltron Clear?

with MS Hardener (D803/D841/D861): Base 100 : Hardener 35 : Thinner 29 (by weight). with Standard Hardener (D802): Base 100 : Hardener 52 : Thinner 45 (by weight).

Which hardener and thinner does D800 Deltron Clear use?

hardener MS Hardener (D803/D841/D861), thinner D870/D871/D872/D873. hardener Standard Hardener (D802), thinner D808/D807/D812.

How much hardener and thinner do I need for 100 g of D800 Deltron Clear?

MS Hardener (D803/D841/D861): 35 g hardener, 29 g thinner (164 g in total). Standard Hardener (D802): 52 g hardener, 45 g thinner (197 g in total).

More PPG Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: PPG Refinish official site