GanemiX 🧮 Calculator

D8188 Glamour LV Clearcoat Mix Ratio & HardenerPPG Clearcoat

D8188 Glamour LV Clearcoat is a PPG (PPG) automotive refinish clearcoat. With hardener Glamour LV Hardener (D8382/D8383/D8384/D8385), the mix ratio is Base 100 : Hardener 29 : Thinner 10 (by weight).

Mix ratio (by weight)

100 : 29 : 10
Base
D8188 Glamour LV Clearcoat
Hardener
Glamour LV Hardener (D8382/D8383/D8384/D8385)
Thinner
Slow Compliant Thinner (D8767)
Pot life
20°C 2-4h

Weight chart

BaseHardenerThinnerTotal
50 g14.5 g5 g69.5 g
100 g29 g10 g139 g
200 g58 g20 g278 g
300 g87 g30 g417 g
500 g145 g50 g695 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 129 g → add thinner to reach 139 g

🧮 Calculate any amount with this mix

Tips for using D8188 Glamour LV Clearcoat

How to read the ratio and weigh it

The mix for D8188 Glamour LV Clearcoat is "Base 100 : Hardener 29 : Thinner 10 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 87 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for D8188 Glamour LV Clearcoat is Glamour LV Hardener (D8382/D8383/D8384/D8385). Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 20°C 2-4h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 14.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 6.9%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of D8188 Glamour LV Clearcoat?

with Glamour LV Hardener (D8382/D8383/D8384/D8385): Base 100 : Hardener 29 : Thinner 10 (by weight).

Which hardener and thinner does D8188 Glamour LV Clearcoat use?

hardener Glamour LV Hardener (D8382/D8383/D8384/D8385), thinner Slow Compliant Thinner (D8767).

How much hardener and thinner do I need for 100 g of D8188 Glamour LV Clearcoat?

Glamour LV Hardener (D8382/D8383/D8384/D8385): 29 g hardener, 10 g thinner (139 g in total).

More PPG Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: PPG Refinish official site