GanemiX 🧮 Calculator

EcoLock Utility Clearcoat M Mix Ratio & HardenerRock Paint Clearcoat

EcoLock Utility Clearcoat M is a Rock Paint (Rock Paint) automotive refinish clearcoat. With hardener EcoLock Hardeners (various), the mix ratio is Base 100 : Hardener 20 : Thinner 5 (by weight).

Mix ratio (by weight)

100 : 20 : 5
Base
EcoLock Utility Clearcoat M
Hardener
EcoLock Hardeners (various)
Thinner
Eco Multi Thinners (various)
Pot life
See the TDS

Weight chart

BaseHardenerThinnerTotal
50 g10 g2.5 g62.5 g
100 g20 g5 g125 g
200 g40 g10 g250 g
300 g60 g15 g375 g
500 g100 g25 g625 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 120 g → add thinner to reach 125 g

🧮 Calculate any amount with this mix

Tips for using EcoLock Utility Clearcoat M

How to read the ratio and weigh it

The mix for EcoLock Utility Clearcoat M is "Base 100 : Hardener 20 : Thinner 5 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 60 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for EcoLock Utility Clearcoat M is EcoLock Hardeners (various). Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

Check the technical data sheet (TDS) for the pot life. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 10 g. Misreading the hardener by 1 g shifts the hardener amount by about 10%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of EcoLock Utility Clearcoat M?

with EcoLock Hardeners (various): Base 100 : Hardener 20 : Thinner 5 (by weight).

Which hardener and thinner does EcoLock Utility Clearcoat M use?

hardener EcoLock Hardeners (various), thinner Eco Multi Thinners (various).

How much hardener and thinner do I need for 100 g of EcoLock Utility Clearcoat M?

EcoLock Hardeners (various): 20 g hardener, 5 g thinner (125 g in total).

More Rock Paint Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Rock Paint official site