GanemiX 🧮 Calculator

Autocoat BT LV 853 Clear Mix Ratio & HardenerAkzoNobel Clearcoat

Autocoat BT LV 853 Clear is an AkzoNobel (AkzoNobel) automotive refinish clearcoat. You can choose from 2 hardeners. With hardener LV 853 Clear Hardener, the mix ratio is Base 100 : Hardener 60 : Thinner 18 (by weight).

With hardener LV 853 Clear Hardener

100 : 60 : 18
Base
Autocoat BT LV 853 Clear
Hardener
LV 853 Clear Hardener
Thinner
LV 853 Reducer Medium/Slow
Pot life
20°C 60min

Weight chart

BaseHardenerThinnerTotal
50 g30 g9 g89 g
100 g60 g18 g178 g
200 g120 g36 g356 g
300 g180 g54 g534 g
500 g300 g90 g890 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 160 g → add thinner to reach 178 g

🧮 Calculate any amount with this mix

With hardener LV 352 / 801 Multi Use Hardener

100 : 60 : 25
Base
Autocoat BT LV 853 Clear
Hardener
LV 352 / 801 Multi Use Hardener
Thinner
LV 853 Reducer Medium/Slow
Pot life
20°C 90min

Weight chart

BaseHardenerThinnerTotal
50 g30 g12.5 g92.5 g
100 g60 g25 g185 g
200 g120 g50 g370 g
300 g180 g75 g555 g
500 g300 g125 g925 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 160 g → add thinner to reach 185 g

🧮 Calculate any amount with this mix

Tips for using Autocoat BT LV 853 Clear

How to read the ratio and weigh it

The mix for Autocoat BT LV 853 Clear is "Base 100 : Hardener 60 : Thinner 18 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 180 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

Autocoat BT LV 853 Clear works with 2 hardeners (LV 853 Clear Hardener, LV 352 / 801 Multi Use Hardener). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.

Pot life and how much to mix

The pot life after mixing is about 20°C 60min, 20°C 90min. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 30 g. Misreading the hardener by 1 g shifts the hardener amount by about 3.3%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of Autocoat BT LV 853 Clear?

with LV 853 Clear Hardener: Base 100 : Hardener 60 : Thinner 18 (by weight). with LV 352 / 801 Multi Use Hardener: Base 100 : Hardener 60 : Thinner 25 (by weight).

Which hardener and thinner does Autocoat BT LV 853 Clear use?

hardener LV 853 Clear Hardener, thinner LV 853 Reducer Medium/Slow. hardener LV 352 / 801 Multi Use Hardener, thinner LV 853 Reducer Medium/Slow.

How much hardener and thinner do I need for 100 g of Autocoat BT LV 853 Clear?

LV 853 Clear Hardener: 60 g hardener, 18 g thinner (178 g in total). LV 352 / 801 Multi Use Hardener: 60 g hardener, 25 g thinner (185 g in total).

More AkzoNobel Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: AkzoNobel official site