Multi (10:1) 240 2-Coat Clearcoat Mix Ratio & HardenerNippon Paint Clearcoat
Multi (10:1) 240 2-Coat Clearcoat is a Nippon Paint (Nippon Paint) automotive refinish clearcoat. With hardener Multi (10:1) Hardeners (various), the mix ratio is Base 100 : Hardener 10 : Thinner 5 (by weight).
Mix ratio (by weight)
100 : 10 : 5- Base
- Multi (10:1) 240 2-Coat Clearcoat
- Hardener
- Multi (10:1) Hardeners (various)
- Thinner
- Multi Urethane Thinner NEO (various)
- Pot life
- 20°C 2h
Weight chart
| Base | Hardener | Thinner | Total |
|---|---|---|---|
| 50 g | 5 g | 2.5 g | 57.5 g |
| 100 g | 10 g | 5 g | 115 g |
| 200 g | 20 g | 10 g | 230 g |
| 300 g | 30 g | 15 g | 345 g |
| 500 g | 50 g | 25 g | 575 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 110 g → add thinner to reach 115 g
🧮 Calculate any amount with this mixTips for using Multi (10:1) 240 2-Coat Clearcoat
How to read the ratio and weigh it
The mix for Multi (10:1) 240 2-Coat Clearcoat is "Base 100 : Hardener 10 : Thinner 5 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 30 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).
Choosing a hardener
The hardener for Multi (10:1) 240 2-Coat Clearcoat is Multi (10:1) Hardeners (various). Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.
Pot life and how much to mix
The pot life after mixing is about 20°C 2h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.
Tips for clearcoats
The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.
Avoiding weighing mistakes
The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 5 g. Misreading the hardener by 1 g shifts the hardener amount by about 20%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.
Clearcoats from other brands
FAQ
What is the mix ratio of Multi (10:1) 240 2-Coat Clearcoat?
with Multi (10:1) Hardeners (various): Base 100 : Hardener 10 : Thinner 5 (by weight).
Which hardener and thinner does Multi (10:1) 240 2-Coat Clearcoat use?
hardener Multi (10:1) Hardeners (various), thinner Multi Urethane Thinner NEO (various).
How much hardener and thinner do I need for 100 g of Multi (10:1) 240 2-Coat Clearcoat?
Multi (10:1) Hardeners (various): 10 g hardener, 5 g thinner (115 g in total).
More Nippon Paint Clearcoats
Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Nippon Paint official site