GanemiX 🧮 Calculator

EcoLock Hyper Clearcoat SW & LW Mix Ratio & HardenerRock Paint Clearcoat

EcoLock Hyper Clearcoat SW & LW is a Rock Paint (Rock Paint) automotive refinish clearcoat. You can choose from 2 hardeners. With hardener EcoLock Hardener (Standard), the mix ratio is Base 100 : Hardener 33.3 : Thinner 28 (by weight).

With hardener EcoLock Hardener (Standard)

100 : 33.3 : 28
Base
EcoLock Hyper Clearcoat SW & LW
Hardener
EcoLock Hardener (Standard)
Thinner
Eco Multi Thinners (various)
Pot life
20°C 2h

Weight chart

BaseHardenerThinnerTotal
50 g16.7 g14 g80.7 g
100 g33.3 g28 g161.3 g
200 g66.6 g56 g322.6 g
300 g99.9 g84 g483.9 g
500 g166.5 g140 g806.5 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 133.3 g → add thinner to reach 161.3 g

🧮 Calculate any amount with this mix

With hardener EcoLock Hardener Flex

100 : 50 : 50
Base
EcoLock Hyper Clearcoat SW & LW
Hardener
EcoLock Hardener Flex
Thinner
Eco Multi Thinners (various)
Pot life
20°C 4h

Weight chart

BaseHardenerThinnerTotal
50 g25 g25 g100 g
100 g50 g50 g200 g
200 g100 g100 g400 g
300 g150 g150 g600 g
500 g250 g250 g1000 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 150 g → add thinner to reach 200 g

🧮 Calculate any amount with this mix

Tips for using EcoLock Hyper Clearcoat SW & LW

How to read the ratio and weigh it

The mix for EcoLock Hyper Clearcoat SW & LW is "Base 100 : Hardener 33.3 : Thinner 28 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 99.9 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

EcoLock Hyper Clearcoat SW & LW works with 2 hardeners (EcoLock Hardener (Standard), EcoLock Hardener Flex). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.

Pot life and how much to mix

The pot life after mixing is about 20°C 2h, 20°C 4h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 16.7 g. Misreading the hardener by 1 g shifts the hardener amount by about 6%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of EcoLock Hyper Clearcoat SW & LW?

with EcoLock Hardener (Standard): Base 100 : Hardener 33.3 : Thinner 28 (by weight). with EcoLock Hardener Flex: Base 100 : Hardener 50 : Thinner 50 (by weight).

Which hardener and thinner does EcoLock Hyper Clearcoat SW & LW use?

hardener EcoLock Hardener (Standard), thinner Eco Multi Thinners (various). hardener EcoLock Hardener Flex, thinner Eco Multi Thinners (various).

How much hardener and thinner do I need for 100 g of EcoLock Hyper Clearcoat SW & LW?

EcoLock Hardener (Standard): 33.3 g hardener, 28 g thinner (161.3 g in total). EcoLock Hardener Flex: 50 g hardener, 50 g thinner (200 g in total).

More Rock Paint Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Rock Paint official site