GanemiX 🧮 Calculator

Standocryl VOC Performance Pro Clear K9590 Mix Ratio & HardenerStandox Clearcoat

Standocryl VOC Performance Pro Clear K9590 is a Standox (PPG group) automotive refinish clearcoat. With hardener Standox VOC Performance Hardener 15-30, the mix ratio is Base 100 : Hardener 50 : Thinner 5 (by weight).

Mix ratio (by weight)

100 : 50 : 5
Base
Standocryl VOC Performance Pro Clear K9590
Hardener
Standox VOC Performance Hardener 15-30
Thinner
Standocryl VOC 2K Performance Additive
Pot life
See the TDS

Weight chart

BaseHardenerThinnerTotal
50 g25 g2.5 g77.5 g
100 g50 g5 g155 g
200 g100 g10 g310 g
300 g150 g15 g465 g
500 g250 g25 g775 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 150 g → add thinner to reach 155 g

🧮 Calculate any amount with this mix

Tips for using Standocryl VOC Performance Pro Clear K9590

How to read the ratio and weigh it

The mix for Standocryl VOC Performance Pro Clear K9590 is "Base 100 : Hardener 50 : Thinner 5 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 150 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for Standocryl VOC Performance Pro Clear K9590 is Standox VOC Performance Hardener 15-30. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

Check the technical data sheet (TDS) for the pot life. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 25 g. Misreading the hardener by 1 g shifts the hardener amount by about 4%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of Standocryl VOC Performance Pro Clear K9590?

with Standox VOC Performance Hardener 15-30: Base 100 : Hardener 50 : Thinner 5 (by weight).

Which hardener and thinner does Standocryl VOC Performance Pro Clear K9590 use?

hardener Standox VOC Performance Hardener 15-30, thinner Standocryl VOC 2K Performance Additive.

How much hardener and thinner do I need for 100 g of Standocryl VOC Performance Pro Clear K9590?

Standox VOC Performance Hardener 15-30: 50 g hardener, 5 g thinner (155 g in total).

More Standox Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Standox official site