GanemiX 🧮 Calculator

Urethane Primer Surfacer Pro V1 Mix Ratio & HardenerNippon Paint Surfacer

Urethane Primer Surfacer Pro V1 is a Nippon Paint (Nippon Paint) automotive refinish surfacer. You can choose from 3 hardeners. With hardener Pro V1 Hardener (5:1), the mix ratio is Base 100 : Hardener 20 : Thinner 15 (by weight).

With hardener Pro V1 Hardener (5:1)

100 : 20 : 15
Base
Urethane Primer Surfacer Pro V1
Hardener
Pro V1 Hardener (5:1)
Thinner
Multi Urethane Thinners (various)
Pot life
20°C 2h

Weight chart

BaseHardenerThinnerTotal
50 g10 g7.5 g67.5 g
100 g20 g15 g135 g
200 g40 g30 g270 g
300 g60 g45 g405 g
500 g100 g75 g675 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 120 g → add thinner to reach 135 g

🧮 Calculate any amount with this mix

With hardener Ultra Hardener (7:1)

100 : 15 : 25
Base
Urethane Primer Surfacer Pro V1
Hardener
Ultra Hardener (7:1)
Thinner
Multi Urethane Thinners (various)
Pot life
20°C 2h

Weight chart

BaseHardenerThinnerTotal
50 g7.5 g12.5 g70 g
100 g15 g25 g140 g
200 g30 g50 g280 g
300 g45 g75 g420 g
500 g75 g125 g700 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 115 g → add thinner to reach 140 g

🧮 Calculate any amount with this mix

With hardener Bumper Hardener

100 : 25 : 20
Base
Urethane Primer Surfacer Pro V1
Hardener
Bumper Hardener
Thinner
Multi Urethane Thinners (various)
Pot life
20°C 2h

Weight chart

BaseHardenerThinnerTotal
50 g12.5 g10 g72.5 g
100 g25 g20 g145 g
200 g50 g40 g290 g
300 g75 g60 g435 g
500 g125 g100 g725 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 125 g → add thinner to reach 145 g

🧮 Calculate any amount with this mix

Tips for using Urethane Primer Surfacer Pro V1

How to read the ratio and weigh it

The mix for Urethane Primer Surfacer Pro V1 is "Base 100 : Hardener 20 : Thinner 15 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 60 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

Urethane Primer Surfacer Pro V1 works with 3 hardeners (Pro V1 Hardener (5:1), Ultra Hardener (7:1), Bumper Hardener). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.

Pot life and how much to mix

The pot life after mixing is about 20°C 2h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for surfacers

The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 10 g. Misreading the hardener by 1 g shifts the hardener amount by about 10%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Surfacers from other brands

FAQ

What is the mix ratio of Urethane Primer Surfacer Pro V1?

with Pro V1 Hardener (5:1): Base 100 : Hardener 20 : Thinner 15 (by weight). with Ultra Hardener (7:1): Base 100 : Hardener 15 : Thinner 25 (by weight). with Bumper Hardener: Base 100 : Hardener 25 : Thinner 20 (by weight).

Which hardener and thinner does Urethane Primer Surfacer Pro V1 use?

hardener Pro V1 Hardener (5:1), thinner Multi Urethane Thinners (various). hardener Ultra Hardener (7:1), thinner Multi Urethane Thinners (various). hardener Bumper Hardener, thinner Multi Urethane Thinners (various).

How much hardener and thinner do I need for 100 g of Urethane Primer Surfacer Pro V1?

Pro V1 Hardener (5:1): 20 g hardener, 15 g thinner (135 g in total). Ultra Hardener (7:1): 15 g hardener, 25 g thinner (140 g in total). Bumper Hardener: 25 g hardener, 20 g thinner (145 g in total).

More Nippon Paint Surfacers

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Nippon Paint official site