GanemiX 🧮 Calculator

Autoclear PC Production Mix Ratio & HardenerAkzoNobel Clearcoat

Autoclear PC Production is an AkzoNobel (AkzoNobel) automotive refinish clearcoat. With hardener Autoclear PC Hardener, the mix ratio is Base 100 : Hardener 50 (by weight).

Mix ratio (by weight)

100 : 50
Base
Autoclear PC Production
Hardener
Autoclear PC Hardener
Thinner
None
Pot life
21°C 1h

Weight chart

BaseHardenerTotal
50 g25 g75 g
100 g50 g150 g
200 g100 g300 g
300 g150 g450 g
500 g250 g750 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 150 g

🧮 Calculate any amount with this mix

Tips for using Autoclear PC Production

How to read the ratio and weigh it

The mix for Autoclear PC Production is "Base 100 : Hardener 50 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 150 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for Autoclear PC Production is Autoclear PC Hardener. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 21°C 1h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 25 g. Misreading the hardener by 1 g shifts the hardener amount by about 4%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of Autoclear PC Production?

with Autoclear PC Hardener: Base 100 : Hardener 50 (by weight).

Which hardener and thinner does Autoclear PC Production use?

hardener Autoclear PC Hardener, no thinner.

How much hardener and thinner do I need for 100 g of Autoclear PC Production?

Autoclear PC Hardener: 50 g hardener (150 g in total).

More AkzoNobel Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: AkzoNobel official site