GanemiX 🧮 Calculator

Multi Eco (3:1) MT Clearcoat (Matte) Mix Ratio & HardenerNippon Paint Clearcoat

Multi Eco (3:1) MT Clearcoat (Matte) is a Nippon Paint (Nippon Paint) automotive refinish clearcoat. With hardener Ultra Hardeners (various), the mix ratio is Base 100 : Hardener 33 : Thinner 50 (by weight).

Mix ratio (by weight)

100 : 33 : 50
Base
Multi Eco (3:1) MT Clearcoat (Matte)
Hardener
Ultra Hardeners (various)
Thinner
Multi Urethane Thinner NEO (various)
Pot life
20°C 2h

Weight chart

BaseHardenerThinnerTotal
50 g16.5 g25 g91.5 g
100 g33 g50 g183 g
200 g66 g100 g366 g
300 g99 g150 g549 g
500 g165 g250 g915 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 133 g → add thinner to reach 183 g

🧮 Calculate any amount with this mix

Tips for using Multi Eco (3:1) MT Clearcoat (Matte)

How to read the ratio and weigh it

The mix for Multi Eco (3:1) MT Clearcoat (Matte) is "Base 100 : Hardener 33 : Thinner 50 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 99 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for Multi Eco (3:1) MT Clearcoat (Matte) is Ultra Hardeners (various). Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 20°C 2h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 16.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 6.1%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of Multi Eco (3:1) MT Clearcoat (Matte)?

with Ultra Hardeners (various): Base 100 : Hardener 33 : Thinner 50 (by weight).

Which hardener and thinner does Multi Eco (3:1) MT Clearcoat (Matte) use?

hardener Ultra Hardeners (various), thinner Multi Urethane Thinner NEO (various).

How much hardener and thinner do I need for 100 g of Multi Eco (3:1) MT Clearcoat (Matte)?

Ultra Hardeners (various): 33 g hardener, 50 g thinner (183 g in total).

More Nippon Paint Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Nippon Paint official site