UU3000 Surfacer Mix Ratio & HardenerKCC Surfacer
UU3000 Surfacer is a KCC (KCC) automotive refinish surfacer. With hardener UU3000-B, the mix ratio is Base 100 : Hardener 14 : Thinner 19 (by weight).
Mix ratio (by weight)
100 : 14 : 19- Base
- UU3000 Surfacer
- Hardener
- UU3000-B
- Thinner
- TH0600
- Pot life
- 4h
Weight chart
| Base | Hardener | Thinner | Total |
|---|---|---|---|
| 50 g | 7 g | 9.5 g | 66.5 g |
| 100 g | 14 g | 19 g | 133 g |
| 200 g | 28 g | 38 g | 266 g |
| 300 g | 42 g | 57 g | 399 g |
| 500 g | 70 g | 95 g | 665 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 114 g → add thinner to reach 133 g
🧮 Calculate any amount with this mixTips for using UU3000 Surfacer
How to read the ratio and weigh it
The mix for UU3000 Surfacer is "Base 100 : Hardener 14 : Thinner 19 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 42 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).
Choosing a hardener
The hardener for UU3000 Surfacer is UU3000-B. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.
Pot life and how much to mix
The pot life after mixing is about 4h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.
Tips for surfacers
The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.
Avoiding weighing mistakes
The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 7 g. Misreading the hardener by 1 g shifts the hardener amount by about 14.3%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.
Surfacers from other brands
FAQ
What is the mix ratio of UU3000 Surfacer?
with UU3000-B: Base 100 : Hardener 14 : Thinner 19 (by weight).
Which hardener and thinner does UU3000 Surfacer use?
hardener UU3000-B, thinner TH0600.
How much hardener and thinner do I need for 100 g of UU3000 Surfacer?
UU3000-B: 14 g hardener, 19 g thinner (133 g in total).
More KCC Surfacers
Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: KCC official site