GanemiX 🧮 Calculator

Urethane Primer Surfacer Jitan Mix Ratio & HardenerNippon Paint Surfacer

Urethane Primer Surfacer Jitan is a Nippon Paint (Nippon Paint) automotive refinish surfacer. You can choose from 2 hardeners. With hardener Pro V1 Hardener (8:1), the mix ratio is Base 100 : Hardener 13 : Thinner 20 (by weight).

With hardener Pro V1 Hardener (8:1)

100 : 13 : 20
Base
Urethane Primer Surfacer Jitan
Hardener
Pro V1 Hardener (8:1)
Thinner
Multi Urethane Thinners (various)
Pot life
20°C 3h

Weight chart

BaseHardenerThinnerTotal
50 g6.5 g10 g66.5 g
100 g13 g20 g133 g
200 g26 g40 g266 g
300 g39 g60 g399 g
500 g65 g100 g665 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 113 g → add thinner to reach 133 g

🧮 Calculate any amount with this mix

With hardener Ultra Hardener (10:1)

100 : 10 : 30
Base
Urethane Primer Surfacer Jitan
Hardener
Ultra Hardener (10:1)
Thinner
Multi Urethane Thinners (various)
Pot life
20°C 3h

Weight chart

BaseHardenerThinnerTotal
50 g5 g15 g70 g
100 g10 g30 g140 g
200 g20 g60 g280 g
300 g30 g90 g420 g
500 g50 g150 g700 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 110 g → add thinner to reach 140 g

🧮 Calculate any amount with this mix

Tips for using Urethane Primer Surfacer Jitan

How to read the ratio and weigh it

The mix for Urethane Primer Surfacer Jitan is "Base 100 : Hardener 13 : Thinner 20 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 39 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

Urethane Primer Surfacer Jitan works with 2 hardeners (Pro V1 Hardener (8:1), Ultra Hardener (10:1)). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.

Pot life and how much to mix

The pot life after mixing is about 20°C 3h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for surfacers

The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 6.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 15.4%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Surfacers from other brands

FAQ

What is the mix ratio of Urethane Primer Surfacer Jitan?

with Pro V1 Hardener (8:1): Base 100 : Hardener 13 : Thinner 20 (by weight). with Ultra Hardener (10:1): Base 100 : Hardener 10 : Thinner 30 (by weight).

Which hardener and thinner does Urethane Primer Surfacer Jitan use?

hardener Pro V1 Hardener (8:1), thinner Multi Urethane Thinners (various). hardener Ultra Hardener (10:1), thinner Multi Urethane Thinners (various).

How much hardener and thinner do I need for 100 g of Urethane Primer Surfacer Jitan?

Pro V1 Hardener (8:1): 13 g hardener, 20 g thinner (133 g in total). Ultra Hardener (10:1): 10 g hardener, 30 g thinner (140 g in total).

More Nippon Paint Surfacers

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Nippon Paint official site