GanemiX 🧮 Calculator

Multi (8:1) 80 Neo Alba Clearcoat Mix Ratio & HardenerNippon Paint Clearcoat

Multi (8:1) 80 Neo Alba Clearcoat is a Nippon Paint (Nippon Paint) automotive refinish clearcoat. You can choose from 2 hardeners. With hardener Ultra Hardeners (various), the mix ratio is Base 100 : Hardener 12.5 : Thinner 15 (by weight).

With hardener Ultra Hardeners (various)

100 : 12.5 : 15
Base
Multi (8:1) 80 Neo Alba Clearcoat
Hardener
Ultra Hardeners (various)
Thinner
Multi Urethane Thinners (various)
Pot life
20°C 2h

Weight chart

BaseHardenerThinnerTotal
50 g6.3 g7.5 g63.8 g
100 g12.5 g15 g127.5 g
200 g25 g30 g255 g
300 g37.5 g45 g382.5 g
500 g62.5 g75 g637.5 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 112.5 g → add thinner to reach 127.5 g

🧮 Calculate any amount with this mix

With hardener Multi (10:1) Hardeners (various)

100 : 10 : 15
Base
Multi (8:1) 80 Neo Alba Clearcoat
Hardener
Multi (10:1) Hardeners (various)
Thinner
Multi Urethane Thinners (various)
Pot life
20°C 2h

Weight chart

BaseHardenerThinnerTotal
50 g5 g7.5 g62.5 g
100 g10 g15 g125 g
200 g20 g30 g250 g
300 g30 g45 g375 g
500 g50 g75 g625 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 110 g → add thinner to reach 125 g

🧮 Calculate any amount with this mix

Tips for using Multi (8:1) 80 Neo Alba Clearcoat

How to read the ratio and weigh it

The mix for Multi (8:1) 80 Neo Alba Clearcoat is "Base 100 : Hardener 12.5 : Thinner 15 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 37.5 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

Multi (8:1) 80 Neo Alba Clearcoat works with 2 hardeners (Ultra Hardeners (various), Multi (10:1) Hardeners (various)). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.

Pot life and how much to mix

The pot life after mixing is about 20°C 2h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 6.3 g. Misreading the hardener by 1 g shifts the hardener amount by about 16%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of Multi (8:1) 80 Neo Alba Clearcoat?

with Ultra Hardeners (various): Base 100 : Hardener 12.5 : Thinner 15 (by weight). with Multi (10:1) Hardeners (various): Base 100 : Hardener 10 : Thinner 15 (by weight).

Which hardener and thinner does Multi (8:1) 80 Neo Alba Clearcoat use?

hardener Ultra Hardeners (various), thinner Multi Urethane Thinners (various). hardener Multi (10:1) Hardeners (various), thinner Multi Urethane Thinners (various).

How much hardener and thinner do I need for 100 g of Multi (8:1) 80 Neo Alba Clearcoat?

Ultra Hardeners (various): 12.5 g hardener, 15 g thinner (127.5 g in total). Multi (10:1) Hardeners (various): 10 g hardener, 15 g thinner (125 g in total).

More Nippon Paint Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Nippon Paint official site