GanemiX 🧮 Calculator

Lesonal 2K HS Fast Clear 420 Mix Ratio & HardenerAkzoNobel Clearcoat

Lesonal 2K HS Fast Clear 420 is an AkzoNobel (AkzoNobel) automotive refinish clearcoat. With hardener HS Hardener 420, the mix ratio is Base 100 : Hardener 60 : Thinner 18 (by weight).

Mix ratio (by weight)

100 : 60 : 18
Base
Lesonal 2K HS Fast Clear 420
Hardener
HS Hardener 420
Thinner
Reducer Clear 420
Pot life
20°C 30min

Weight chart

BaseHardenerThinnerTotal
50 g30 g9 g89 g
100 g60 g18 g178 g
200 g120 g36 g356 g
300 g180 g54 g534 g
500 g300 g90 g890 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 160 g → add thinner to reach 178 g

🧮 Calculate any amount with this mix

Tips for using Lesonal 2K HS Fast Clear 420

How to read the ratio and weigh it

The mix for Lesonal 2K HS Fast Clear 420 is "Base 100 : Hardener 60 : Thinner 18 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 180 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for Lesonal 2K HS Fast Clear 420 is HS Hardener 420. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 20°C 30min. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 30 g. Misreading the hardener by 1 g shifts the hardener amount by about 3.3%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of Lesonal 2K HS Fast Clear 420?

with HS Hardener 420: Base 100 : Hardener 60 : Thinner 18 (by weight).

Which hardener and thinner does Lesonal 2K HS Fast Clear 420 use?

hardener HS Hardener 420, thinner Reducer Clear 420.

How much hardener and thinner do I need for 100 g of Lesonal 2K HS Fast Clear 420?

HS Hardener 420: 60 g hardener, 18 g thinner (178 g in total).

More AkzoNobel Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: AkzoNobel official site