Autoclear Plus HS Mix Ratio & HardenerAkzoNobel Clearcoat
Autoclear Plus HS is an AkzoNobel (AkzoNobel) automotive refinish clearcoat. You can choose from 2 hardeners. With hardener P25 Hardener, the mix ratio is Base 100 : Hardener 50 : Thinner 14 (by weight).
With hardener P25 Hardener
100 : 50 : 14- Base
- Autoclear Plus HS
- Hardener
- P25 Hardener
- Thinner
- Plus Reducer Fast/Medium/Slow
- Pot life
- 20°C 4h
Weight chart
| Base | Hardener | Thinner | Total |
|---|---|---|---|
| 50 g | 25 g | 7 g | 82 g |
| 100 g | 50 g | 14 g | 164 g |
| 200 g | 100 g | 28 g | 328 g |
| 300 g | 150 g | 42 g | 492 g |
| 500 g | 250 g | 70 g | 820 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 150 g → add thinner to reach 164 g
🧮 Calculate any amount with this mixWith hardener P35 Hardener
100 : 50 : 14- Base
- Autoclear Plus HS
- Hardener
- P35 Hardener
- Thinner
- Plus Reducer Medium/Slow/Extra Slow
- Pot life
- 20°C 7h
Weight chart
| Base | Hardener | Thinner | Total |
|---|---|---|---|
| 50 g | 25 g | 7 g | 82 g |
| 100 g | 50 g | 14 g | 164 g |
| 200 g | 100 g | 28 g | 328 g |
| 300 g | 150 g | 42 g | 492 g |
| 500 g | 250 g | 70 g | 820 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 150 g → add thinner to reach 164 g
🧮 Calculate any amount with this mixTips for using Autoclear Plus HS
How to read the ratio and weigh it
The mix for Autoclear Plus HS is "Base 100 : Hardener 50 : Thinner 14 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 150 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).
Choosing a hardener
Autoclear Plus HS works with 2 hardeners (P25 Hardener, P35 Hardener). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.
Pot life and how much to mix
The pot life after mixing is about 20°C 4h, 20°C 7h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.
Tips for clearcoats
The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.
Avoiding weighing mistakes
The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 25 g. Misreading the hardener by 1 g shifts the hardener amount by about 4%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.
Clearcoats from other brands
FAQ
What is the mix ratio of Autoclear Plus HS?
with P25 Hardener: Base 100 : Hardener 50 : Thinner 14 (by weight). with P35 Hardener: Base 100 : Hardener 50 : Thinner 14 (by weight).
Which hardener and thinner does Autoclear Plus HS use?
hardener P25 Hardener, thinner Plus Reducer Fast/Medium/Slow. hardener P35 Hardener, thinner Plus Reducer Medium/Slow/Extra Slow.
How much hardener and thinner do I need for 100 g of Autoclear Plus HS?
P25 Hardener: 50 g hardener, 14 g thinner (164 g in total). P35 Hardener: 50 g hardener, 14 g thinner (164 g in total).
More AkzoNobel Clearcoats
Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: AkzoNobel official site