GanemiX 🧮 Calculator

G3-8800S Mix Ratio & HardenerCromax Clearcoat

G3-8800S is a Cromax (Axalta) automotive refinish clearcoat. You can choose from 2 hardeners. With hardener 256S/AK260/AK261, the mix ratio is Base 100 : Hardener 36.6 : Thinner 9.5 (by weight).

With hardener 256S/AK260/AK261

100 : 36.6 : 9.5
Base
G3-8800S
Hardener
256S/AK260/AK261
Thinner
JAB380/385/JXB387
Pot life
20°C 3h

Weight chart

BaseHardenerThinnerTotal
50 g18.3 g4.8 g73.1 g
100 g36.6 g9.5 g146.1 g
200 g73.2 g19 g292.2 g
300 g109.8 g28.5 g438.3 g
500 g183 g47.5 g730.5 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 136.6 g → add thinner to reach 146.1 g

🧮 Calculate any amount with this mix

With hardener XK203/XK205/XK206

100 : 28.5 : 11.8
Base
G3-8800S
Hardener
XK203/XK205/XK206
Thinner
JAB380/385/JXB387
Pot life
20°C 4h

Weight chart

BaseHardenerThinnerTotal
50 g14.3 g5.9 g70.2 g
100 g28.5 g11.8 g140.3 g
200 g57 g23.6 g280.6 g
300 g85.5 g35.4 g420.9 g
500 g142.5 g59 g701.5 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 128.5 g → add thinner to reach 140.3 g

🧮 Calculate any amount with this mix

Tips for using G3-8800S

How to read the ratio and weigh it

The mix for G3-8800S is "Base 100 : Hardener 36.6 : Thinner 9.5 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 109.8 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

G3-8800S works with 2 hardeners (256S/AK260/AK261, XK203/XK205/XK206). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.

Pot life and how much to mix

The pot life after mixing is about 20°C 3h, 20°C 4h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 18.3 g. Misreading the hardener by 1 g shifts the hardener amount by about 5.5%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of G3-8800S?

with 256S/AK260/AK261: Base 100 : Hardener 36.6 : Thinner 9.5 (by weight). with XK203/XK205/XK206: Base 100 : Hardener 28.5 : Thinner 11.8 (by weight).

Which hardener and thinner does G3-8800S use?

hardener 256S/AK260/AK261, thinner JAB380/385/JXB387. hardener XK203/XK205/XK206, thinner JAB380/385/JXB387.

How much hardener and thinner do I need for 100 g of G3-8800S?

256S/AK260/AK261: 36.6 g hardener, 9.5 g thinner (146.1 g in total). XK203/XK205/XK206: 28.5 g hardener, 11.8 g thinner (140.3 g in total).

More Cromax Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site