GanemiX 🧮 Calculator

Standocryl VOC Easy Ultra Clear K9515 Mix Ratio & HardenerStandox Clearcoat

Standocryl VOC Easy Ultra Clear K9515 is a Standox (PPG group) automotive refinish clearcoat. With hardener Standox Hardener VOC Easy (various), the mix ratio is Base 100 : Hardener 52 : Thinner 7 (by weight).

Mix ratio (by weight)

100 : 52 : 7
Base
Standocryl VOC Easy Ultra Clear K9515
Hardener
Standox Hardener VOC Easy (various)
Thinner
Standox Thinner VOC (various)
Pot life
20°C 45-60min

Weight chart

BaseHardenerThinnerTotal
50 g26 g3.5 g79.5 g
100 g52 g7 g159 g
200 g104 g14 g318 g
300 g156 g21 g477 g
500 g260 g35 g795 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 152 g → add thinner to reach 159 g

🧮 Calculate any amount with this mix

Tips for using Standocryl VOC Easy Ultra Clear K9515

How to read the ratio and weigh it

The mix for Standocryl VOC Easy Ultra Clear K9515 is "Base 100 : Hardener 52 : Thinner 7 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 156 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for Standocryl VOC Easy Ultra Clear K9515 is Standox Hardener VOC Easy (various). Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 20°C 45-60min. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 26 g. Misreading the hardener by 1 g shifts the hardener amount by about 3.8%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of Standocryl VOC Easy Ultra Clear K9515?

with Standox Hardener VOC Easy (various): Base 100 : Hardener 52 : Thinner 7 (by weight).

Which hardener and thinner does Standocryl VOC Easy Ultra Clear K9515 use?

hardener Standox Hardener VOC Easy (various), thinner Standox Thinner VOC (various).

How much hardener and thinner do I need for 100 g of Standocryl VOC Easy Ultra Clear K9515?

Standox Hardener VOC Easy (various): 52 g hardener, 7 g thinner (159 g in total).

More Standox Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Standox official site