GanemiX 🧮 Calculator

Aegis (3:1) TS Clearcoat 2 Mix Ratio & HardenerNippon Paint Clearcoat

Aegis (3:1) TS Clearcoat 2 is a Nippon Paint (Nippon Paint) automotive refinish clearcoat. With hardener Dedicated Hardeners for TS Clear (various), the mix ratio is Base 100 : Hardener 33 : Thinner 20 (by weight).

Mix ratio (by weight)

100 : 33 : 20
Base
Aegis (3:1) TS Clearcoat 2
Hardener
Dedicated Hardeners for TS Clear (various)
Thinner
Multi Urethane Thinners (various)
Pot life
See the TDS

Weight chart

BaseHardenerThinnerTotal
50 g16.5 g10 g76.5 g
100 g33 g20 g153 g
200 g66 g40 g306 g
300 g99 g60 g459 g
500 g165 g100 g765 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 133 g → add thinner to reach 153 g

🧮 Calculate any amount with this mix

Tips for using Aegis (3:1) TS Clearcoat 2

How to read the ratio and weigh it

The mix for Aegis (3:1) TS Clearcoat 2 is "Base 100 : Hardener 33 : Thinner 20 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 99 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for Aegis (3:1) TS Clearcoat 2 is Dedicated Hardeners for TS Clear (various). Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

Check the technical data sheet (TDS) for the pot life. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 16.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 6.1%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of Aegis (3:1) TS Clearcoat 2?

with Dedicated Hardeners for TS Clear (various): Base 100 : Hardener 33 : Thinner 20 (by weight).

Which hardener and thinner does Aegis (3:1) TS Clearcoat 2 use?

hardener Dedicated Hardeners for TS Clear (various), thinner Multi Urethane Thinners (various).

How much hardener and thinner do I need for 100 g of Aegis (3:1) TS Clearcoat 2?

Dedicated Hardeners for TS Clear (various): 33 g hardener, 20 g thinner (153 g in total).

More Nippon Paint Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Nippon Paint official site