Standox Matt Clear System (K9150/K9140) Mix Ratio & HardenerStandox Clearcoat
Standox Matt Clear System (K9150/K9140) is a Standox (PPG group) automotive refinish clearcoat. With hardener Standox Hardener VOC 20-25, the mix ratio is Base 100 : Hardener 26.6 : Thinner 8.3 (by weight).
Mix ratio (by weight)
100 : 26.6 : 8.3- Base
- Standox Matt Clear System (K9150/K9140)
- Hardener
- Standox Hardener VOC 20-25
- Thinner
- Standox 2K Thinner T25-35
- Pot life
- 1h15min-1h30min
Weight chart
| Base | Hardener | Thinner | Total |
|---|---|---|---|
| 50 g | 13.3 g | 4.2 g | 67.5 g |
| 100 g | 26.6 g | 8.3 g | 134.9 g |
| 200 g | 53.2 g | 16.6 g | 269.8 g |
| 300 g | 79.8 g | 24.9 g | 404.7 g |
| 500 g | 133 g | 41.5 g | 674.5 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 126.6 g → add thinner to reach 134.9 g
🧮 Calculate any amount with this mixTips for using Standox Matt Clear System (K9150/K9140)
How to read the ratio and weigh it
The mix for Standox Matt Clear System (K9150/K9140) is "Base 100 : Hardener 26.6 : Thinner 8.3 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 79.8 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).
Choosing a hardener
The hardener for Standox Matt Clear System (K9150/K9140) is Standox Hardener VOC 20-25. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.
Pot life and how much to mix
The pot life after mixing is about 1h15min-1h30min. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.
Tips for clearcoats
The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.
Avoiding weighing mistakes
The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 13.3 g. Misreading the hardener by 1 g shifts the hardener amount by about 7.5%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.
Clearcoats from other brands
FAQ
What is the mix ratio of Standox Matt Clear System (K9150/K9140)?
with Standox Hardener VOC 20-25: Base 100 : Hardener 26.6 : Thinner 8.3 (by weight).
Which hardener and thinner does Standox Matt Clear System (K9150/K9140) use?
hardener Standox Hardener VOC 20-25, thinner Standox 2K Thinner T25-35.
How much hardener and thinner do I need for 100 g of Standox Matt Clear System (K9150/K9140)?
Standox Hardener VOC 20-25: 26.6 g hardener, 8.3 g thinner (134.9 g in total).
More Standox Clearcoats
Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Standox official site