GanemiX 🧮 Calculator

3050S Mix Ratio & HardenerCromax Clearcoat

3050S is a Cromax (Axalta) automotive refinish clearcoat. You can choose from 3 hardeners. With hardener 256S/AK260, the mix ratio is Base 100 : Hardener 35 (by weight).

With hardener 256S/AK260

100 : 35
Base
3050S
Hardener
256S/AK260
Thinner
None
Pot life
See the TDS

Weight chart

BaseHardenerTotal
50 g17.5 g67.5 g
100 g35 g135 g
200 g70 g270 g
300 g105 g405 g
500 g175 g675 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 135 g

🧮 Calculate any amount with this mix

With hardener XK203/XK205

100 : 27
Base
3050S
Hardener
XK203/XK205
Thinner
None
Pot life
See the TDS

Weight chart

BaseHardenerTotal
50 g13.5 g63.5 g
100 g27 g127 g
200 g54 g254 g
300 g81 g381 g
500 g135 g635 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 127 g

🧮 Calculate any amount with this mix

With hardener XK206

100 : 28
Base
3050S
Hardener
XK206
Thinner
None
Pot life
See the TDS

Weight chart

BaseHardenerTotal
50 g14 g64 g
100 g28 g128 g
200 g56 g256 g
300 g84 g384 g
500 g140 g640 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 128 g

🧮 Calculate any amount with this mix

Tips for using 3050S

How to read the ratio and weigh it

The mix for 3050S is "Base 100 : Hardener 35 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 105 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

3050S works with 3 hardeners (256S/AK260, XK203/XK205, XK206). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.

Pot life and how much to mix

Check the technical data sheet (TDS) for the pot life. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 17.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 5.7%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of 3050S?

with 256S/AK260: Base 100 : Hardener 35 (by weight). with XK203/XK205: Base 100 : Hardener 27 (by weight). with XK206: Base 100 : Hardener 28 (by weight).

Which hardener and thinner does 3050S use?

hardener 256S/AK260, no thinner. hardener XK203/XK205, no thinner. hardener XK206, no thinner.

How much hardener and thinner do I need for 100 g of 3050S?

256S/AK260: 35 g hardener (135 g in total). XK203/XK205: 27 g hardener (127 g in total). XK206: 28 g hardener (128 g in total).

More Cromax Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site