GanemiX 🧮 Calculator

680S Mix Ratio & HardenerCromax Clearcoat

680S is a Cromax (Axalta) automotive refinish clearcoat. You can choose from 2 hardeners. With hardener 256S/AK260/AK261, the mix ratio is Base 100 : Hardener 35 : Thinner 18 (by weight).

With hardener 256S/AK260/AK261

100 : 35 : 18
Base
680S
Hardener
256S/AK260/AK261
Thinner
JAB380/385/JXB387
Pot life
20°C 4h

Weight chart

BaseHardenerThinnerTotal
50 g17.5 g9 g76.5 g
100 g35 g18 g153 g
200 g70 g36 g306 g
300 g105 g54 g459 g
500 g175 g90 g765 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 135 g → add thinner to reach 153 g

🧮 Calculate any amount with this mix

With hardener XK203/XK205/XK206

100 : 27 : 22
Base
680S
Hardener
XK203/XK205/XK206
Thinner
JAB380/385/JXB387
Pot life
20°C 6h

Weight chart

BaseHardenerThinnerTotal
50 g13.5 g11 g74.5 g
100 g27 g22 g149 g
200 g54 g44 g298 g
300 g81 g66 g447 g
500 g135 g110 g745 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 127 g → add thinner to reach 149 g

🧮 Calculate any amount with this mix

Tips for using 680S

How to read the ratio and weigh it

The mix for 680S is "Base 100 : Hardener 35 : Thinner 18 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 105 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

680S works with 2 hardeners (256S/AK260/AK261, XK203/XK205/XK206). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.

Pot life and how much to mix

The pot life after mixing is about 20°C 4h, 20°C 6h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 17.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 5.7%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of 680S?

with 256S/AK260/AK261: Base 100 : Hardener 35 : Thinner 18 (by weight). with XK203/XK205/XK206: Base 100 : Hardener 27 : Thinner 22 (by weight).

Which hardener and thinner does 680S use?

hardener 256S/AK260/AK261, thinner JAB380/385/JXB387. hardener XK203/XK205/XK206, thinner JAB380/385/JXB387.

How much hardener and thinner do I need for 100 g of 680S?

256S/AK260/AK261: 35 g hardener, 18 g thinner (153 g in total). XK203/XK205/XK206: 27 g hardener, 22 g thinner (149 g in total).

More Cromax Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site