GanemiX 🧮 Calculator

CC144 Ultra System Clear Speed Elite Mix Ratio & HardenerSherwin-Williams Clearcoat

CC144 Ultra System Clear Speed Elite is a Sherwin-Williams (Sherwin-Williams) automotive refinish clearcoat. With hardener AC44, the mix ratio is Base 100 : Hardener 98 (by weight).

Mix ratio (by weight)

100 : 98
Base
CC144 Ultra System Clear Speed Elite
Hardener
AC44
Thinner
None
Pot life
25min

Weight chart

BaseHardenerTotal
50 g49 g99 g
100 g98 g198 g
200 g196 g396 g
300 g294 g594 g
500 g490 g990 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 198 g

🧮 Calculate any amount with this mix

Tips for using CC144 Ultra System Clear Speed Elite

How to read the ratio and weigh it

The mix for CC144 Ultra System Clear Speed Elite is "Base 100 : Hardener 98 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 294 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for CC144 Ultra System Clear Speed Elite is AC44. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 25min. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 49 g. Misreading the hardener by 1 g shifts the hardener amount by about 2%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of CC144 Ultra System Clear Speed Elite?

with AC44: Base 100 : Hardener 98 (by weight).

Which hardener and thinner does CC144 Ultra System Clear Speed Elite use?

hardener AC44, no thinner.

How much hardener and thinner do I need for 100 g of CC144 Ultra System Clear Speed Elite?

AC44: 98 g hardener (198 g in total).

More Sherwin-Williams Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Sherwin-Williams official site