CC140 Ultra System Clear Elite Gloss Mix Ratio & HardenerSherwin-Williams Clearcoat
CC140 Ultra System Clear Elite Gloss is a Sherwin-Williams (Sherwin-Williams) automotive refinish clearcoat. With hardener AC23/AC24/AC25/AC26, the mix ratio is Base 100 : Hardener 33 : Thinner 4 (by weight).
Mix ratio (by weight)
100 : 33 : 4- Base
- CC140 Ultra System Clear Elite Gloss
- Hardener
- AC23/AC24/AC25/AC26
- Thinner
- R24/R25/R26
- Pot life
- 20-55min
Weight chart
| Base | Hardener | Thinner | Total |
|---|---|---|---|
| 50 g | 16.5 g | 2 g | 68.5 g |
| 100 g | 33 g | 4 g | 137 g |
| 200 g | 66 g | 8 g | 274 g |
| 300 g | 99 g | 12 g | 411 g |
| 500 g | 165 g | 20 g | 685 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 133 g → add thinner to reach 137 g
🧮 Calculate any amount with this mixTips for using CC140 Ultra System Clear Elite Gloss
How to read the ratio and weigh it
The mix for CC140 Ultra System Clear Elite Gloss is "Base 100 : Hardener 33 : Thinner 4 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 99 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).
Choosing a hardener
The hardener for CC140 Ultra System Clear Elite Gloss is AC23/AC24/AC25/AC26. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.
Pot life and how much to mix
The pot life after mixing is about 20-55min. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.
Tips for clearcoats
The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.
Avoiding weighing mistakes
The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 16.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 6.1%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.
Clearcoats from other brands
FAQ
What is the mix ratio of CC140 Ultra System Clear Elite Gloss?
with AC23/AC24/AC25/AC26: Base 100 : Hardener 33 : Thinner 4 (by weight).
Which hardener and thinner does CC140 Ultra System Clear Elite Gloss use?
hardener AC23/AC24/AC25/AC26, thinner R24/R25/R26.
How much hardener and thinner do I need for 100 g of CC140 Ultra System Clear Elite Gloss?
AC23/AC24/AC25/AC26: 33 g hardener, 4 g thinner (137 g in total).
More Sherwin-Williams Clearcoats
Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Sherwin-Williams official site