FC740 Finish 1 2.1 VOC Super Brillante Mix Ratio & HardenerSherwin-Williams Clearcoat
FC740 Finish 1 2.1 VOC Super Brillante is a Sherwin-Williams (Sherwin-Williams) automotive refinish clearcoat. With hardener FH741/FH742/FH743, the mix ratio is Base 100 : Hardener 25 (by weight).
Mix ratio (by weight)
100 : 25- Base
- FC740 Finish 1 2.1 VOC Super Brillante
- Hardener
- FH741/FH742/FH743
- Thinner
- None
- Pot life
- See the TDS
Weight chart
| Base | Hardener | Total |
|---|---|---|
| 50 g | 12.5 g | 62.5 g |
| 100 g | 25 g | 125 g |
| 200 g | 50 g | 250 g |
| 300 g | 75 g | 375 g |
| 500 g | 125 g | 625 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 125 g
🧮 Calculate any amount with this mixTips for using FC740 Finish 1 2.1 VOC Super Brillante
How to read the ratio and weigh it
The mix for FC740 Finish 1 2.1 VOC Super Brillante is "Base 100 : Hardener 25 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 75 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).
Choosing a hardener
The hardener for FC740 Finish 1 2.1 VOC Super Brillante is FH741/FH742/FH743. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.
Pot life and how much to mix
Check the technical data sheet (TDS) for the pot life. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.
Tips for clearcoats
The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.
Avoiding weighing mistakes
The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 12.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 8%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.
Clearcoats from other brands
FAQ
What is the mix ratio of FC740 Finish 1 2.1 VOC Super Brillante?
with FH741/FH742/FH743: Base 100 : Hardener 25 (by weight).
Which hardener and thinner does FC740 Finish 1 2.1 VOC Super Brillante use?
hardener FH741/FH742/FH743, no thinner.
How much hardener and thinner do I need for 100 g of FC740 Finish 1 2.1 VOC Super Brillante?
FH741/FH742/FH743: 25 g hardener (125 g in total).
More Sherwin-Williams Clearcoats
Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Sherwin-Williams official site