GanemiX 🧮 Calculator

Standocryl VOC Xtreme Plus Clear K9720 Mix Ratio & HardenerStandox Clearcoat

Standocryl VOC Xtreme Plus Clear K9720 is a Standox (PPG group) automotive refinish clearcoat. With hardener Standox Xtreme Hardeners (various), the mix ratio is Base 100 : Hardener 50 (by weight).

Mix ratio (by weight)

100 : 50
Base
Standocryl VOC Xtreme Plus Clear K9720
Hardener
Standox Xtreme Hardeners (various)
Thinner
None
Pot life
See the TDS

Weight chart

BaseHardenerTotal
50 g25 g75 g
100 g50 g150 g
200 g100 g300 g
300 g150 g450 g
500 g250 g750 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 150 g

🧮 Calculate any amount with this mix

Tips for using Standocryl VOC Xtreme Plus Clear K9720

How to read the ratio and weigh it

The mix for Standocryl VOC Xtreme Plus Clear K9720 is "Base 100 : Hardener 50 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 150 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for Standocryl VOC Xtreme Plus Clear K9720 is Standox Xtreme Hardeners (various). Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

Check the technical data sheet (TDS) for the pot life. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 25 g. Misreading the hardener by 1 g shifts the hardener amount by about 4%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of Standocryl VOC Xtreme Plus Clear K9720?

with Standox Xtreme Hardeners (various): Base 100 : Hardener 50 (by weight).

Which hardener and thinner does Standocryl VOC Xtreme Plus Clear K9720 use?

hardener Standox Xtreme Hardeners (various), no thinner.

How much hardener and thinner do I need for 100 g of Standocryl VOC Xtreme Plus Clear K9720?

Standox Xtreme Hardeners (various): 50 g hardener (150 g in total).

More Standox Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Standox official site