LE2710S/40S/70S Mix Ratio & HardenerCromax Surfacer
LE2710S/40S/70S is a Cromax (Axalta) automotive refinish surfacer. With hardener LE2705S, the mix ratio is Base 100 : Hardener 50 : Thinner 5 (by weight).
Mix ratio (by weight)
100 : 50 : 5- Base
- LE2710S/40S/70S
- Hardener
- LE2705S
- Thinner
- LE1075S
- Pot life
- 20°C 4-6h
Weight chart
| Base | Hardener | Thinner | Total |
|---|---|---|---|
| 50 g | 25 g | 2.5 g | 77.5 g |
| 100 g | 50 g | 5 g | 155 g |
| 200 g | 100 g | 10 g | 310 g |
| 300 g | 150 g | 15 g | 465 g |
| 500 g | 250 g | 25 g | 775 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 150 g → add thinner to reach 155 g
🧮 Calculate any amount with this mixTips for using LE2710S/40S/70S
How to read the ratio and weigh it
The mix for LE2710S/40S/70S is "Base 100 : Hardener 50 : Thinner 5 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 150 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).
Choosing a hardener
The hardener for LE2710S/40S/70S is LE2705S. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.
Pot life and how much to mix
The pot life after mixing is about 20°C 4-6h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.
Tips for surfacers
The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.
Avoiding weighing mistakes
The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 25 g. Misreading the hardener by 1 g shifts the hardener amount by about 4%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.
Surfacers from other brands
FAQ
What is the mix ratio of LE2710S/40S/70S?
with LE2705S: Base 100 : Hardener 50 : Thinner 5 (by weight).
Which hardener and thinner does LE2710S/40S/70S use?
hardener LE2705S, thinner LE1075S.
How much hardener and thinner do I need for 100 g of LE2710S/40S/70S?
LE2705S: 50 g hardener, 5 g thinner (155 g in total).
More Cromax Surfacers
Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site