GanemiX 🧮 Calculator

669SJ2 Mix Ratio & HardenerCromax Clearcoat

669SJ2 is a Cromax (Axalta) automotive refinish clearcoat. With hardener AK265 SR, the mix ratio is Base 100 : Hardener 35 : Thinner 7.5 (by weight).

Mix ratio (by weight)

100 : 35 : 7.5
Base
669SJ2
Hardener
AK265 SR
Thinner (5-10%)
JCT5110/5120/5130
Pot life
20°C 1h

Weight chart

BaseHardenerThinner (5-10%)Total
50 g17.5 g3.8 g71.3 g
100 g35 g7.5 g142.5 g
200 g70 g15 g285 g
300 g105 g22.5 g427.5 g
500 g175 g37.5 g712.5 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 135 g → add thinner (5-10%) to reach 142.5 g

* The TDS gives a range for the thinner (5-10%), so this chart uses the midpoint.

🧮 Calculate any amount with this mix

Tips for using 669SJ2

How to read the ratio and weigh it

The mix for 669SJ2 is "Base 100 : Hardener 35 : Thinner 7.5 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 105 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for 669SJ2 is AK265 SR. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 20°C 1h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 17.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 5.7%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of 669SJ2?

with AK265 SR: Base 100 : Hardener 35 : Thinner 7.5 (by weight).

Which hardener and thinner does 669SJ2 use?

hardener AK265 SR, thinner (5-10%) JCT5110/5120/5130.

How much hardener and thinner do I need for 100 g of 669SJ2?

AK265 SR: 35 g hardener, 7.5 g thinner (5-10%) (142.5 g in total).

More Cromax Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site